FAA Issues Prelim Report In Helicycle Forced Landing | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.21.25

Airborne-Unlimited-07.22.25

AirborneUnlimited-07.23.25

Airborne-Unlimited-07.24.25

AirborneUnlimited-07.25.25

Fri, Aug 12, 2011

FAA Issues Prelim Report In Helicycle Forced Landing

Florida Man Uninjured, Helicopter Substantially Damaged At Mentone

The FAA has issued a preliminary report on the forced landing of a Helicycle experimental helicopter on Saturday, August 6, the final day of the Popular Rotorcraft Association's (PRA) annual convention and fly-in at the PRA Mentone Airport in Indiana. (Helicycle file photo shown.)

PRA Director Tom Milton reported in an online forum that witnesses reported the pilot of the accident aircraft "was flying low and making a sharp turn down wind. It looked as if a rapid application of power was needed to pretty up the maneuver. I was told (by two helicopter pilot witnesses) that at just that moment, the turbine was heard spooling down."

In its preliminary report the FAA, which reportedly did not visit the scene, commented only that the helicopter "crashed in a bean field and rolled over." Witnesses say the pilot exited the aircraft, dazed but apparently uninjured. The FAA reports the aircraft was substantially damaged.

WANE-TV cites the Kosciusko County Police Department in identifying the accident pilot as 61-year-old William Robert Hyde of Miami, FL.

The Helicycle is a single-seat helicopter built from a kit manufactured by Eagle R&D of Nampa, ID. The kit purchase includes a Solar T-62 turbine engine which is blueprinted before delivery to the customer. Torque is limited by the belt-drive clutch, and engine RPM is limited by an engine controller provided by the kitmaker.

In a forced landing incident last year in Illinois involving another Helicycle, the owner, PRA Secretary Stan Foster, reported that an abrupt reduction in collective pitch coming off a max performance takeoff resulted in a brief overshoot in engine RPM, which triggered an engine shutdown. That forced landing, also made from low altitude, resulted in a fast, but successful run-on landing, in which the machine was undamaged.

The Popular Rotorcraft Association, started in 1962 by Dr. Igor Bensen of Bensen Gyrocopter fame, is dedicated to the interests of builders and fliers of rotorcraft operated for personal, recreational and educational use.

FMI: www.helicycle.com ; www.pra.org

Advertisement

More News

Airborne 07.21.25: Nighthawk!, Hartzell Expands, Deltahawk 350HP!

Also: New Lakeland Fly-in!, Gleim's DPE, MOSAIC! Nearly three-quarters of a century in the making, EAA is excited about the future… especially with the potential of a MOSAIC>[...]

ANN's Daily Aero-Term (07.27.25): Estimated (EST)

Estimated (EST) -When used in NOTAMs “EST” is a contraction that is used by the issuing authority only when the condition is expected to return to service prior to the >[...]

ANN's Daily Aero-Linx (07.27.25)

Aero Linx: Regional Airline Association (RAA) Regional airlines provide critical links connecting communities throughout North America to the national and international air transpo>[...]

NTSB Final Report: Luce Buttercup

The Airplane Broke Up In Flight And Descended To The Ground. The Debris Path Extended For About 1,435 Ft. Analysis: The pilot, who was the owner and builder of the experimental, am>[...]

Classic Aero-TV: 'That's All Brother'-Restoring a True Piece of Military History

From 2015 (YouTube version): History Comes Alive Thanks to A Magnificent CAF Effort The story of the Douglas C-47 named, “That’s all Brother,” is fascinating from>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC