NTSB Factual Report: Beech 36 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Mon, Jun 29, 2020

NTSB Factual Report: Beech 36

Pilot Realized That He Was Interrupted During His Starting Checklist And Concluded That He Did Not Turn On The Alternators

Location: Batavia, NY Accident Number: ERA20CA203
Date & Time: 06/01/2020, 1230 EDT Registration: N15DN
Aircraft: Beech 36 Aircraft Damage: Substantial
Defining Event: Landing gear not configured Injuries: 1 None
Flight Conducted Under: Part 91: General Aviation - Positioning

According to the pilot, after a normal start and runup, he departed the airport and climbed to the cruise altitude. After reaching that altitude, he noted a flashing message indicator on the GPS that stated there was an electrical system issue. The pilot informed air traffic control that he would return to the departure airport to repair the issue, and about 7 miles from the airport, the GPS and primary flight display began to flash. The pilot pulled the circuit breakers to the flashing displays and set up for a straight in approach to the runway. He realized the airplane needed to lose altitude and attempted to extend the flaps, however, the flaps did not extend. He reset the circuit breakers, but the flaps still did not extend. He continued the approach, mistakenly forgot to extend the landing gear, and landed on the runway with the landing gear retracted. During the accident sequence, the fuselage was substantially damaged.

After the accident, the pilot realized that he was interrupted during his starting checklist and concluded that he did not turn on the alternators (alternator and standby alternator) during the start procedures. Therefore, the airplane avionics were running on battery power the entire flight, which resulted in a loss of electrical power. He reported no other mechanical malfunctions of the airplane that would have precluded normal operation prior to the accident.

FMI: www.ntsb.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC