FAA Investigates Bearing Problems On 2,800 Bell Helos | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Thu, Mar 19, 2009

FAA Investigates Bearing Problems On 2,800 Bell Helos

Model 206, 407 And 427 Helis Subject To AD

A problem that first crept up during a customer delivery flight last week led the FAA Wednesday to ground approximately 2,800 Canadian-built Bell helicopters until operators can search for improperly installed bearings on the co-pilot cyclic controls, and replace the suspect parts if necessary.

Emergency Airworthiness Directive 2009-7-51, issued Wednesday, calls for immediate inspections of cyclics installed in Bell Model 206A series, 206B series, and 206L series helicopers with a lever assembly, part number (P/N) 206-001-401-111, 206-001-400-115, or 206-001-400-111, installed; and Model 407 and 427 helicopters with a lever assembly, P/N 407-001-320-105 or 407-001-320-109, installed, certificated in any category.

Bell spokesman Greg Hubbard said the company discovered the problem during a delivery flight last week. Hubbard did not specify where that delivery took place, though the FAA cites a Transport Canada directive as basis for its AD. The Canadian mandate was issued March 12, and applies to helicopters produced in Canada.

"Transport Canada, the airworthiness authority for Canada, notified the FAA that an unsafe condition may exist on certain helicopters with less than 50 flight hours or with a cyclic lever assembly installed within the last 50 flight hours," reads the AD. "Transport Canada advises that 'it is possible that an incorrectly installed bearing could be found in any helicopter with a cyclic control lever assembly recently installed.' Failure of the cyclic control lever assembly could lead to loss of control of the helicopter. Transport Canada classified the ASBs as mandatory and issued AD No. CF-2009-10, dated March 12, 2009, to ensure the continued airworthiness of these helicopters in Canada.

"This unsafe condition is likely to exist or develop on other helicopters of the same type designs," the FAA added, explaining the wide net cast by the agency in the initial AD.

Hubbard told the Fort Worth Star-Telegram the company expects the FAA to narrow the field considerably in coming days, down to less than 110 newer helicopters affected by the AD.

FMI: www.faa.gov, www.bellhelicopter.com

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC