NTSB Releases Preliminary Report On Mosquito Helicopter Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Thu, May 24, 2018

NTSB Releases Preliminary Report On Mosquito Helicopter Accident

Pilot Says Amateur-Built Aircraft Experienced A Loss Of Power During Flight

The NTSB has released its preliminary report from an accident involving an amateur-built Mosquito XE helicopter that resulted in the serious injury of the aircraft's pilot.

According to the report, on April 24, 2018, about 1403 eastern daylight time, an experimental, amateur-built Mosquito XE helicopter, N911CY, was destroyed by a postimpact fire after a hard landing shortly after takeoff from Gaines Valley Aviation Airport (NY06), Albion, New York. The private pilot was seriously injured. The helicopter was owned and operated by the pilot under the provisions of Title 14 Code of Federal Regulations Part 91. Visual meteorological conditions prevailed at the time and no flight plan was filed for the local flight.

According to an FAA inspector, the pilot advised him while hospitalized that after takeoff, while flying about twice the height of powerlines in a westerly direction over a field, the helicopter experienced a partial loss of engine power. He began looking for a place to land, and then the engine experienced total loss of power. He indicated that the helicopter did not have adequate main rotor rpm to autorotate, and as a result it impacted hard.

A witness who was driving on Gaines Road near NY06 reported observing the helicopter hovering approximately 6 ft above ground level adjacent to hangars. He then observed the helicopter ascend "straight up" to about twice the height as nearby powerlines, and then proceeded in a westerly direction crossing Gaines Road. He observed a "small piece" separate and then heard a popping sound that was immediately followed by a grinding sound. The helicopter then began a steep descent during which time a "second piece" separated from the helicopter. The helicopter impacted the ground and immediately burst into flames. He called 911, then responded to the accident site and rendered assistance to the pilot until first responders arrived.

The helicopter, which was equipped with an Innovator Technologies Inntec 800 two-stroke, two cylinder, 85 horsepower engine, was retained for examination.

(Image from file. Not accident aircraft)

FMI: Report

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC