Tape Solution Addresses New FAA-Mandated Robinson AD | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Wed, Jul 20, 2011

Tape Solution Addresses New FAA-Mandated Robinson AD

Airwolf Aerospace Offers STCd Rotor Blade Tape To Protect Against Delamination On Robinson Helicopters

FAA-certified (STC) blade tape kits are being marketed by Airwolf Aerospace LLC as a protective measure against blade skin delamination on Robinson R22 and R44 helicopter main rotor blades. The FAA recently issued a second Airworthiness Directive (AD 2011-12-10) on all Robinson helicopters.

In 2007, Robinson Helicopter Co. issued service alerts SB-72 and SB-103 advising owners that some main rotor blade skins were prone to debonding at the skin-to-spar joint on the lower surface of the blade tips, causing the aircraft to compromise its airworthiness. Debonding can occur when the bond line is exposed due to excessive erosion of the blade finish, or when corrosion occurs on the internal aluminium tip cap.

This most recent AD revisits a 2007 directive, which instructs Robinson R22 and R44 operators to inspect main-rotor blades for possible defects before each flight. Airwolf addressed this through its Alternative Method Of Compliance (AMOC), a certified blade tape that overlaps the skin and leading edge, obviating the need for recurrent inspections and lap-joint painting.

Airwolf Aerospace Senior Engineer, John Montana said, “ The problem of delamination can be largely avoided if owners install our easy-to-apply blade tapes, protecting the joint in question. We look at our tapes as an effective form of insurance against having to buy new blades which can cost between $25,000 and $40,000.

Airwolf’s solution, STC- SR02491CH, uses a proprietary polymer tape which is bonded to the blade. This  prevents the leading-edge skin debonding, which occurs when the bond line is exposed due to erosion of the blade’s painted finish. The blade tape covers the outboard section of the rotor blade where history has shown debonding to occur.  It seals the bond line making penetration by foreign objects impossible, and drastically reduces the risk of blade skin delamination.
“Pre-flight blade inspections required by the A.D. are now a breeze as all the pilot has to do is look up and see the blade tape is still covering the bond line..  It is a great solution to a problem that affects more than 3,000 helicopters in the US alone,” adds Montana.

Working with 3M, Airwolf modified 3M’s tape that was originally designed for use on CH-47 Chinook and S-70 Blackhawk helicopters, to make it compatible for the smaller, narrower Robinson rotor blade. Applied as per Airwolf’s detailed instructions, the tape prevents delamination without causing any loss in aerodynamic performance.

The current price of the rotor blade protective kit is $1299 for the R22 and $2499 for the R44. Once the initial kit and STC has been purchased, Airwolf offers blade tape repair kits costing $500 for the R22 and $1000 for the R44.

FMI: www.airwolfaerospace.com

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC