AD: Sikorsky Aircraft Corporation Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Mon, Apr 19, 2021

AD: Sikorsky Aircraft Corporation Helicopters

AD 2021-08-18 Prompted By The Discovery That Certain Part Numbers Listed In AD 2021-04-16 Are Incorrect

The FAA is superseding Airworthiness Directive (AD) 2021-04-16 which applied to certain Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters.

AD 2021-04-16 required a one-time inspection of the landing gear for components with non-conforming threads and removal of any non-conforming threaded hinge pin and main landing gear (MLG) and nose landing gear (NLG) actuator pins. AD 2021-04-16 also prohibited installing certain part-numbered hinge and actuator pins on any helicopter. This AD requires the same actions but corrects erroneous part numbers. This AD was prompted by the discovery that certain part numbers listed in AD 2021-04-16 are incorrect. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 29, 2021.

Supplementary Information: The FAA issued AD 2021-04-16, Amendment 39-21438 (86 FR 13631, March 10, 2021) (AD 2021-04-16), for Sikorsky Model S-92A helicopters with serial numbers (S/Ns) 920006 through 920334 inclusive. AD 2021-04-16 required a one-time inspection of the landing gear and the removal from service of certain serial-numbered threaded hinge pins part number (P/N) 92250-12281-101 and certain serial-numbered MLG and NLG actuator pins P/N 92250-12287-101 and 92250-12287-103.

AD 2021-04-16 was prompted by the manufacturer discovering nonconforming threads, resulting in a life limit reduction on multiple landing gear components including threaded hinge pins and MLG and NLG actuator pins. The FAA issued AD 2021-04-16 to prevent failure of components on the MLG and NLG. The unsafe condition, if not addressed, could result in damage to the helicopter and reduced ability to control the helicopter during landing.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC