AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Aug 17, 2022

AD: The Boeing Company Airplanes

AD 2022-13-10 Prompted By Reports Of Burned Boeing Material Specification (BMS) 8-39 Urethane Foam

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes.

This AD was prompted by reports of burned Boeing Material Specification (BMS) 8-39 urethane foam, which is a material with fire-retardant properties that deteriorate with age. This AD requires replacing certain BMS 8-39 foam pads with Nomex felt in certain areas, removing certain BMS 8-39 foam pads in a certain area (which includes a general visual inspection to find BMS 8-39 foam pads), and inspecting the corner seals to determine if the corner seals were replaced, and replacing affected corner seals. This AD also prohibits the installation of BMS 8-39 urethane foam seal in certain locations. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective September 20, 2022.

 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes. The NPRM published in the Federal Register on January 31, 2022 (87 FR 4828). The NPRM was prompted by reports of burned BMS 8-39 urethane foam, which is a material with fireretardant properties that deteriorate with age. In the NPRM, the FAA proposed to require replacing certain BMS 8-39 foam pads with Nomex felt in certain areas, removing certain BMS 8-39 foam pads in a certain area (which includes a general visual inspection to find BMS 8-39 foam pads), and inspecting the corner seals to determine if the corner seals were replaced, and replacing affected corner seals. The FAA is issuing this AD to address degraded BMS 8-39 urethane foam used in seals, which may fail to maintain sufficient halon concentrations in the cargo compartments to extinguish or contain fire or smoke, and may result in penetration of smoke or fire into the flight compartment, leading to possible loss of control of the airplane.

FMI: www.regulations.gov

Advertisement

More News

Airborne 06.30.25: US v ADS-B Misuse, Nat’l STOL Fire, Volocopter Resumes

Also: Netherlands Donates 18 F16s, 2 737s Collide On Ramp, E-7 Wedgetail Cut, AgEagle's 100th In S Korea The Pilot and Aircraft Privacy Act was introduced in the House by Represent>[...]

NTSB Prelim: Piper PA-23

Pilot Also Reported That Due To A Fuel Leak, The Auxiliary Fuel Tanks Were Not Used On June 4, 2025, at 13:41 eastern daylight time, a Piper PA-23, N2109P, was substantially damage>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: One Man’s Vietnam

From 2023 (YouTube Edition): Reflections on War’s Collective Lessons and Cyclical Nature The exigencies of war ought be colorblind. Inane social-constructs the likes of racis>[...]

Klyde Morris (06.30.25)

What Goes Around, May Yet Come Back Around, Klyde FMI: www.klydemorris.com>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC