NTSB Prelim: Cessna 414 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Sun, May 29, 2022

NTSB Prelim: Cessna 414

...Planned To Complete A Local Flight To Evaluate The Autopilot’s Performance

Location: Connellsville, PA Accident Number: ERA22LA215
Date & Time: May 2, 2022, 15:50 Local Registration: N46TA
Aircraft: Cessna 414 Injuries: 1 Serious, 1 Minor
Flight Conducted Under: Part 91: General aviation - Flight test

On May 2, 2022, about 1550 eastern daylight time, a Cessna 414 airplane, N46TA, was substantially damaged when it was involved in an accident at Joseph A. Hardy  Connellsville Airport (VVS), Connellsville, Pennsylvania. The commercial pilot sustained minor injuries and the passenger sustained serious injuries. The flight was operated as a post-maintenance functional check flight under the provisions of Title 14 Code of Federal Regulations Part 91.

The pilot, who was also a mechanic, reported that prior to flight he had uninstalled and reinstalled the S-TEC autopilot mode control unit in the cockpit due to a discrepancy reported on a previous flight. He then planned to complete a local flight to evaluate the autopilot’s performance. The pilot stated that following a normal taxi and run-up, he initiated the takeoff. When the airplane reached rotation speed, he pulled back on the flight controls with one hand, however, the flight controls did not move. He then pulled aft on the flight controls with two hands, and when no movement was felt, he pulled both throttles to idle and applied maximum braking. The airplane was unable to stop on the remaining runway and continued off the runway, down a ravine and collided with trees and terrain, which resulted in substantial damage to the fuselage and wings.

The pilot reported that prior to the takeoff he performed a “complete run-up” and there was nothing “strange” with the flight controls.

Examination of the cockpit panel revealed that the left avionics stack contained a Garmin GNS 530 GPS and a Bendix-King KX-155 Navigation/ Communication receiver. The avionics tray that held the KX-155 unit was found stuck in the open portion of the elevator bellcrank. The tray displayed bending and the bellcrank displayed scratches. When the avionics tray was removed from the bellcrank movement area, the flight controls were manipulated with a full range of movement observed. The Garmin GNS530 and KX-155 avionics trays were secured to the front of the cockpit panel, however, there was no evidence that rear, or side straps, were installed on the avionics trays holding the rear portion of the avionics level. Review of FAA airworthiness records revealed that the Garmin GNS 530 was first installed in
2006.

The airplane was retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC