NTSB Releases Preliminary Report In Powered Parachute Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Wed, Apr 19, 2017

NTSB Releases Preliminary Report In Powered Parachute Accident

Pilot Fatally Injured, Passenger Survived

The NTSB has issued a preliminary report from an accident  involving a Buckeye Aviation Dream Machine two-seat powered parachute which collided with trees and terrain near Knoxville, TN on April 2.

According to the report, the powered parachute was substantially damaged. The sport pilot was fatally injured, and one passenger was seriously injured. The powered parachute was registered to and operated by the pilot. Day, visual meteorological conditions prevailed, and no flight plan was filed for the local, personal flight. The flight originated at a private, grass airstrip about 1444.

The passenger reported that the preflight portion of the flight was uneventful. The takeoff was accomplished on a grass airstrip and the flight departed to the west. About 45 minutes later, the pilot overflew the passenger's residence. Subsequently, the pilot maneuvered the powered parachute to the east, over rising terrain and trees. The aircraft did not seem to be climbing quickly enough to clear the trees and the landing gear struck about three trees before the aircraft dropped into the woods, striking tree limbs on the way down. The passenger egressed his seat; however, he was unable to walk and was met by first responders and transported to a local hospital. The passenger further stated that he was not aware of any problems with the engine prior to the accident.

All structure and components of the powered parachute were accounted for at the accident site. The powered parachute was found in the upright position in a forested area. There was no fire. The landing gear remained attached to the frame. The tubular frame was buckled or bent in several places. The parachute and lines were adjacent to the airframe, and were entangled with broken tree branches. Continuity from the parachute to the cockpit flight controls was established. Both occupants were wearing helmets at the time of the accident and an intercom system was installed.

The engine mounts were broken. The three-bladed composite propeller remained attached to the engine, and the outer sections of each blade were broken and splintered. Continuity from the cockpit controls to the engine was established. The 8-gallon fuel tank contained about 4 gallons of fuel.

The pilot, who was seated in the front cockpit seat, held a sport pilot certificate. He did not hold a Federal Aviation Administration medical certificate. According to his pilot logbook, he had logged about 90 hours of total flight experience, all in Buckeye powered parachutes.

The single-engine, tandem-cockpit powered parachute incorporated a fixed, tricycle landing gear. It was equipped with a Rotax 582-series, two-stroke, twin-cylinder reciprocating engine rated at 66 horsepower. Examination of maintenance records revealed that it was built in 2005 and accumulated about 139 hours since new.

(Source: NTSB)

FMI: Preliminary Report

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC