The Airplane Factory (TAF) Sling Debuts 4 Place Turbo With Rotax 915 iS | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Fri, Aug 03, 2018

The Airplane Factory (TAF) Sling Debuts 4 Place Turbo With Rotax 915 iS

First Customer Built Sling 4 Was Displayed At AirVenture

By Tom Woodward

There are few new entries on the four place kit built market these day but the TAF Sling 4 is an impressive entry. This is the first company airplane to use the Rotax 915 iS injected, turbocharged engine. This engine produces maximum 141 HP and delivers full take off power up to 15,000 feet with a service ceiling of 23,000 feet. Like other Rotax engines it is a four cylinder, horizontally opposed, four stroke, air-cooled engine with an Engine Management System but the 915 iS is turbocharged with a 1200 hour TBO.

Interior cockpit width is 44 inches with back seats that can be folded down to allow carriage of long items such as fishing rods, skis or even a surfboard through the aft compartment into the extended cargo area. The ship has a Magnum ballistic parachute which TAF says is much less expensive to repack or replace than other whole-airframe parachutes.

I spent over an hour chatting with the South African Father/Son team who built N135WT at the Sling Facilities in California. Wayne and Son Matthew Toddun spent about three weeks with the assistance of the factory utilizing the quick build kit that complies with the 51% rule. The Father and Son team slept at the hanger, had utilization of all the factory tools, and had an incentive as they wanted to bring the ship to Oshkosh.

They finished the plane with full avionics, paint and interior with only enough time to remove the wings and ship it to Oshkosh. After the show, son Matthew will get some valuable cross-country time flying home in another Sting ship while Dad remains in Oshkosh where he has lined up a DAR to certify the build and then Wayne will fly off the Phase one time.

ANN Update: Jim Campbell test flew the ship a few days ago and not only came away impressed, but has one word for the bird... "WANT!" More details upcoming via ANN and Airborne Unlimited.

(Image from file)

FMI: www.airplanefactory.com

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC