New Lycoming AD to Affect 16,000 Customers | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.19.25

Airborne-NextGen-05.20.25

AirborneUnlimited-05.21.25

Airborne-AffordableFlyers-05.22.25

AirborneUnlimited-05.23.25

Tue, Nov 05, 2024

New Lycoming AD to Affect 16,000 Customers

FAA Issues Directive Following Reports of In-Flight Shutdowns

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) affecting Lycoming engine models with specific connecting rod assemblies. This was prompted by a series of reports of con rod failures that caused uncontained engine breakdowns and in-flight shutdowns (IFSDs).

The directive mandates routine oil inspections to identify bronze metal particles, a potential indicator of connecting rod degradation. If any particles are detected, mechanics must perform additional checks on connecting rod bushings for signs of damage, misfit, movement, or excessive wear. Replacing compromised bushings with approved parts is required to prevent flight risks.

According to the FAA, around 16,000 engines on US aircraft, including popular IO-360 and O-320 models, fall under this directive. Inspections and potential bushing replacements are projected to incur significant costs, with estimates placing oil inspection expenses at approximately $235 per engine, connecting rod bushing inspections at $85, and bushing replacements at around $762 each.

For U.S. operators, the AD could result in roughly $3.76 million for oil inspections, $1.36 million for bushing inspections, and around $12.19 million for part replacements.

The manufacturer’s analysis concluded that certain connecting rod bushings installed between 2009 and 2017 were manufactured below specification, specifically in terms of outer diameter (OD). This substandard sizing leads to reduced retention in the connecting rod, allowing the bushing to shift within the rod assembly and suffer wear from piston forces. This misfit accelerates part failure, risking uncontained engine events.

The directive is set to take effect December 5, 2024. It does not specify an oil change frequency, so inspections can continue on each operator's maintenance schedule. Oil filters are typically evaluated at each oil change regardless of the AD, so it should not cause too much hassle unless anything concerning is found.

Given the significant risks posed, the FAA deems this AD essential for maintaining operational safety across affected Lycoming-powered aircraft.

FMI: www.faa.gov

Advertisement

More News

Oshkosh Memories: An Aero-News Stringer Perspective

From 2021: The Inside Skinny On What Being An ANN Oshkosh Stringer Is All About By ANN Senior Stringer Extraordinare, Gene Yarbrough The annual gathering at Oshkosh is a right of p>[...]

NTSB Prelim: Piper PA32RT

Video Showed That During The Takeoff, The Nose Baggage Door Was Open On May 10, 2025, about 0935 eastern daylight time, a Piper PA-32RT-300, N30689, was destroyed when it was invol>[...]

ANN FAQ: Follow Us On Instagram!

Get The Latest in Aviation News NOW on Instagram Are you on Instagram yet? It's been around for a few years, quietly picking up traction mostly thanks to everybody's new obsession >[...]

Aero-News: Quote of the Day (05.28.25)

"I think what is key, we have offered a bonus to air traffic controllers who are eligible to retire. We are going to pay them a 20% bonus on their salary to stay longer. Don't reti>[...]

ANN's Daily Aero-Term (05.28.25): Pilot Briefing

Aero Linx: Pilot Briefing The gathering, translation, interpretation, and summarization of weather and aeronautical information into a form usable by the pilot or flight supervisor>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC