NASA Conducts Second Test Of Ares Main Parachute | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.17.24

Airborne-NextGen-06.18.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Sat, Nov 17, 2007

NASA Conducts Second Test Of Ares Main Parachute

Large Parachute Passes With 'Falling' Colors

NASA and industry engineers successfully tested the main parachute for Constellation Program rockets during a drop test Thursday at the US Army's Yuma Proving Ground near Yuma, AZ. The parachute system will allow Ares I and Ares V first stage boosters to be recovered and reused.

Thursday's test validated the results of an earlier test conducted in September.

"Measuring 150-feet in diameter and weighing 2,000 pounds, this is the biggest chute of its kind that's been tested," said Steve Cook, director of the Ares Projects Office at NASA's Marshall Space Flight Center in Huntsville, Ala. "With each milestone, we bring ourselves one step closer to further exploring the moon."

Exploring the moon and beyond is the focus of the Constellation Program, which is developing a new family of US launch vehicles, spacecraft and related systems for exploration.

Booster recovery was the focus of the recent test, the second in a series. Outfitted with a 42,000-pound weight to simulate the load of a rocket's first stage, the main parachute was dropped from a US Air Force C-17 aircraft flying at an altitude of 16,500 feet. The 1-ton parachute and all supporting hardware functioned properly, landing safely approximately three minutes later on the Yuma Proving Ground test range.

During the first main parachute test on Sept. 25, the parachute was dropped from a slightly higher elevation of 17,500 feet, giving NASA engineers the opportunity to monitor parachute performance at a dynamic pressure of 86 pounds per square foot. After the drop's completion, engineers spent several weeks reviewing test data - measuring the parachute's peak loads at opening, determining the canopy expansion rate during the early phase of inflation and measuring the parachute's drag area as it drifted down to Earth.

The Ares first stage booster recovery system is derived from the system NASA uses to recover the space shuttle's solid rocket boosters after launch. The first stage booster for Ares I is similar to the space shuttle's solid rocket booster but has an added fifth segment of propellant, resulting in a heavier load.

The current parachute tests are necessary to allow for differences between the space shuttle's four-segment boosters and the Ares launch vehicles. Testing is scheduled to run through 2010.

FMI: www.nasa.gov/constellation

Advertisement

More News

USCG MH-60 To The Rescue (Again) -- Rescues 4 Boaters

Capsized Vessel Located Near Dauphin Island, Alabama The Coast Guard rescued four boaters after their vessel capsized near Dauphin Island, Alabama, Thursday. Coast Guard District E>[...]

Gray Eagle Order Placed for Army National Guard

Reserve Components Looking to Improve In-House General Atomics Aeronautical Systems announced a fresh order for a dozen Gray Eagle 25M UAVs with accompanying equipment, for fulfill>[...]

Aero-Biz Survival 101 (1120a): Expert Ideas To Help You Through Tough Times

Brand New! Avoid The Need For A Comeback... Get Your Marketing Right, Right Now! Some time ago, the Aero-News Network, responding to numerous requests, established a marketing and >[...]

Airborne 06.03.24: Rotax 915/916 SB, Starship 4 Ready?, B-17 Mementos

Also: Hubble On Pause, FedEx Pilots Picket, Nexus eVTOL, VFS Honors The Rotax folks have published a Service Bulletin after issues were noted that may affect all R915i and R916i se>[...]

Mid-Continent Instruments and Avionics Mourns Former Leader

John W. Winter of AEA and Avionic Fame Passes John W. Winter brought Mid-Continent Instrument Company into the modern era in 1980, purchasing the firm and using it as a base for ex>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC