AD: PZL Swidnik S.A. Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.02.25

Airborne-NextGen-06.03.25

AirborneUnlimited-06.04.25

Airborne-AffordableFlyers-06.05.25

AirborneUnlimited-06.06.25

Sat, Aug 21, 2021

AD: PZL Swidnik S.A. Helicopters

AD 2021-17-13 Prompted By A Report Of A Damaged Wheel Braking System Pneumatic Line Fitting

The FAA is adopting a new airworthiness directive (AD) for certain PZL Swidnik S.A. Model PZL W-3A helicopters.

This AD was prompted by a report of a damaged wheel braking system pneumatic line fitting installed on the left-hand (LH) main landing gear (MLG) leg. This AD requires modifying the LH MLG leg. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective September 7, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2018-0274, dated December 13, 2018 (EASA AD 2018-0274), to correct an unsafe condition for Wytwórnia Sprzetu Komunikacyjnego (WSK) “PZL-Swidnik” Spólka Akcyjna (S.A.) Model PZL W-3A helicopters. EASA advises that damage was reported of the wheel braking system pneumatic line fitting installed on the LH MLG leg. Subsequent investigation determined that the wheel braking system pneumatic line fitting damage was caused by an impact of a load hoisted by the rescue hoist. This condition, if not addressed, could result in loss of MLG wheel braking capability, and subsequent loss of control of the helicopter during a roll-on landing.

Accordingly, EASA AD 2018-00274 requires, for helicopters equipped with a rescue hoist, modification of the LH MLG leg by installing shield assembly part number (P/N) 37.96.204.00.00.

EASA AD 2018-0274 also specifies that for helicopters not equipped with a rescue hoist, installation of a rescue hoist is permitted provided that the helicopter is also modified by installing the shield assembly.

FMI: www.regulations.gov

Advertisement

More News

Citation Operators Get Another Flight Data Connection for QA

LinxUs System Adds Capabilities for Data-Driven Operators Textron Aviation announced another option for operators processing their post-flight data, adding interoperability with GE>[...]

ANN's Daily Aero-Linx (06.01.25)

Aero Linx: The de Havilland Moth Club Ltd The de Havilland Moth Club evolved from a belief that an association of owners and operators of Moth aeroplanes should be formed to create>[...]

NTSB Final Report: Bellanca 8GCBC

(Pilot) Inadvertently Applied Excessive Braking Action, And The Airplane Nosed Over Analysis: The pilot reported that, while landing at a remote, rough and uneven airstrip in a tai>[...]

Aero-News: Quote of the Day (06.01.25)

“MCADT is committed to rapidly integrating armed first-person view drones into the FMF, enhancing small-unit lethality and providing organic capabilities that warfighters cur>[...]

Classic Aero-TV: High-Speed Match-up - Venom and GE Rebirth A Legend

From 2017 (YouTube Edition): Major Engine Supplier Joins Forces With Small Aircraft Manufacturer… GE recently made an agreement with Venom Aircraft to supply engines for the>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC