NTSB Final Report: Schempp-Hirth Discus CS | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.24.25

AirborneNextGen-
11.18.25

Airborne-Unlimited-11.19.25

Airborne-AffordableFlyers-11.20.25

AirborneUnlimited-11.21.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Tue, Jun 04, 2024

NTSB Final Report: Schempp-Hirth Discus CS

Improper Repair Of A (Canopy) Crack By Maintenance Personnel...

Location: Woodstock, Virginia Accident Number: ERA23LA013
Date & Time: October 8, 2022, 09:50 Local Registration: N520RJ
Aircraft: Schempp-Hirth Discus CS Aircraft Damage: Substantial
Defining Event: Part(s) separation from AC Injuries: 1 None
Flight Conducted Under: Part 91: General aviation - Personal

Analysis: The pilot reported that the glider was at 3,700 ft mean sea level when the canopy suddenly, without warning, separated from the glider. He subsequently landed uneventfully at his intended destination airport.

Review of maintenance records revealed that about 2 years before the accident, a maintenance facility stop-drilled a hole to correct a canopy crack at the rear hinge along the glide frame. Metallurgical examination revealed that the drilled hole appeared to halt progression of the original crack along its initial propagation direction. However, both the new primary separation crack and a secondary crack propagated from the hole in diametrically opposite directions, which suggests they likely developed due to a stress state along the same plane. Additionally, both cracks propagated from internal surface corners of the hole, indicating the corners likely acted as stress risers that facilitated crack initiation.

There was no approved method from the glider manufacturer to stop-drill a hole in plexiglass; however, manufacturer approval was not required as the glider was registered in the experimental category. The glider manufacturer stated that it was common practice for cracks in the plexiglass to be drilled-out to stop the crack progression as a temporary solution; however, for a proper repair, the canopy must be removed and re-glued. 

The presence of multiple cracks propagating out of the same stress riser of the internal hole corner indicated that the specific hole drilled did not prevent subsequent progression of further cracking and the eventual separation of the canopy.

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- Improper repair of a crack by maintenance personnel, which resulted in a subsequent failure of the glider canopy.

FMI: www.ntsb.gov

Advertisement

More News

Airborne 11.24.25: ANN's 30th!, Starship’s V3 Booster Boom, Earhart Records

Also: 1st-Ever Space Crime Was a Fraud, IAE Buys Diamonds, Kennon Bows Out, Perseverance Rover An interesting moment came about this past Sunday as ANN CEO, Jim Campbell, noted tha>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: DeltaHawk Aero Engine Defies Convention

From 2023 (YouTube Edition): Deviation from the Historical Mean Racine, Wisconsin-based DeltaHawk is a privately-held manufacturer of reciprocating engines for aircraft and hybrid >[...]

NTSB Final Report: Glasair GlaStar

Smoke Began Entering The Cockpit During The Landing Flare, And Then The Pilot Noticed Flames On The Right Side Of The Airplane Analysis: The pilot reported that about 30 minutes in>[...]

ANN's Daily Aero-Term (11.22.25): Remote Communications Outlet (RCO)

Remote Communications Outlet (RCO) An unmanned communications facility remotely controlled by air traffic personnel. RCOs serve FSSs. Remote Transmitter/Receivers (RTR) serve termi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC