NTSB Determines Cause Of Asiana Flight 214 Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.24.25

AirborneNextGen-
11.18.25

Airborne-Unlimited-11.19.25

Airborne-AffordableFlyers-11.20.25

AirborneUnlimited-11.21.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Wed, Jun 25, 2014

NTSB Determines Cause Of Asiana Flight 214 Accident

Board Cites Mismanagement Of Approach, Inadequate Monitoring Of Airspeed, Other Factors

In a Board meeting held Tuesday, the NTSB determined that Asiana flight 214 crashed when the airplane descended below the visual glidepath due to the flight crew's mismanagement of the approach and inadequate monitoring of airspeed. The Board also found that the complexities of the autothrottle and autopilot flight director systems, and the crew's misunderstanding of those systems, contributed to the accident.

On July 6, 2013, about 11:28 a.m. (PDT), the Boeing 777 was on approach to runway 28L at San Francisco International Airport in San Francisco, California when it struck the seawall at the end of the runway. Three of the 291 passengers died; 40 passengers, eight of the 12 flight attendants, and one of the four flight crewmembers received serious injuries. The other 248 passengers, four flight attendants, and three flight crewmembers received minor injuries or were not injured. The impact forces and a postcrash fire destroyed the airplane.

The NTSB determined that the flight crew mismanaged the initial approach and that the airplane was well above the desired glidepath as it neared the runway. In response to the excessive altitude, the captain selected an inappropriate autopilot mode and took other actions that, unbeknownst to him, resulted in the autothrottle no longer controlling airspeed.

As the airplane descended below the desired glidepath, the crew did not notice the decreasing airspeed nor did they respond to the unstable approach. The flight crew began a go-around maneuver when the airplane was below 100 feet, but it was too late and the airplane struck the seawall.

"In this accident, the flight crew over-relied on automated systems without fully understanding how they interacted," said NTSB Acting Chairman Christopher A. Hart. "Automation has made aviation safer. But even in highly automated aircraft, the human must be the boss."

As a result of this accident investigation, the NTSB made recommendations to the Federal Aviation Administration, Asiana Airlines, The Boeing Company, the Aircraft Rescue and Firefighting Working Group, and the City of San Francisco.

These recommendations address the safety issues identified in the investigation, including the need for reinforced adherence to Asiana flight crew standard operating procedures, more opportunities for manual flying for Asiana pilots, a context-dependent low energy alerting system, and both certification design review and enhanced training on the Boeing 777 autoflight system.

The recommendations also address the need for improved emergency communications, and staffing requirements and training for aircraft rescue and firefighting personnel.

"Today, good piloting includes being on the lookout for surprises in how the automation works, and taking control when needed," Hart said. "Good design means not only maximizing reliability, but also minimizing surprises and uncertainties."

(NTSB Photos)

FMI: NTSB Abstract

Advertisement

More News

Airborne 11.24.25: ANN's 30th!, Starship’s V3 Booster Boom, Earhart Records

Also: 1st-Ever Space Crime Was a Fraud, IAE Buys Diamonds, Kennon Bows Out, Perseverance Rover An interesting moment came about this past Sunday as ANN CEO, Jim Campbell, noted tha>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: DeltaHawk Aero Engine Defies Convention

From 2023 (YouTube Edition): Deviation from the Historical Mean Racine, Wisconsin-based DeltaHawk is a privately-held manufacturer of reciprocating engines for aircraft and hybrid >[...]

NTSB Final Report: Glasair GlaStar

Smoke Began Entering The Cockpit During The Landing Flare, And Then The Pilot Noticed Flames On The Right Side Of The Airplane Analysis: The pilot reported that about 30 minutes in>[...]

ANN's Daily Aero-Term (11.22.25): Remote Communications Outlet (RCO)

Remote Communications Outlet (RCO) An unmanned communications facility remotely controlled by air traffic personnel. RCOs serve FSSs. Remote Transmitter/Receivers (RTR) serve termi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC