NTSB Prelim: Cessna P210 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Wed, Nov 03, 2021

NTSB Prelim: Cessna P210

Rolled Left And Reached An Inverted Attitude Before It Impacted Nose First

Location: Atlanta, GA Accident Number: ERA22FA009
Date & Time: October 8, 2021, 13:11 Local Registration: N128EE
Aircraft: Cessna P210 Injuries: 4 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On October 8, 2021, about 1311 eastern daylight time, a Cessna P210N, N128EE, was destroyed when it was involved in an accident at Dekalb-Peachtree Airport (PDK), Atlanta, Georgia. The pilot, and three passengers were fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

Review of PDK airport security surveillance video revealed that the airplane lifted off about 1,000 ft down runway 21 in a nose-high attitude. The airplane then rolled left and reached an inverted attitude before it impacted nose first beside the runway.

The debris area was compact, and the ground scars were consistent with the airplane impacting in a nose first, right wing down attitude. The fuselage came to rest upright, oriented on a magnetic heading of 245°. The engine remained attached to the firewall through the tubular engine mount and was heavily fire damaged. The propeller was separated from the engine at the propeller gearbox. One propeller blade remained attached to the propeller and the four other blades fractured off at the hub. The cabin and instrument panel were consumed by the postimpact fire. Both wings were separated from the fuselage and sustained significant postimpact fire damage. The tail section was thermally damaged. Flight control cable continuity was partially established due to multiple separations that displayed signatures consistent with overload separation and postimpact fire damage. The elevator trim tab actuator was observed in the thermally damaged wreckage with both actuator rods separated. The inboard actuator rod measured 1.5 inches extended which correlated to 5° tab down. The outboard actuator rod measured 1.7 inches extended which correlated to 5° tab up. Both trim tab actuator rods were free to rotate.

The six-seat, high-wing, retractable landing gear airplane, serial number P21000133, was manufactured in 1978. It was originally equipped with a reciprocating engine; however, it was converted to a RollsRoyce 250-B17F/2 turbo shaft 450-horsepower engine, equipped with a five-bladed composite MT propeller. Review of maintenance records revealed that the conversion was completed on July 19, 2021. At that time, the airframe had accumulated about 1,390 total hours and the engine had accumulated 2.3 hours since overhaul.

The airframe and engine were retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC