Flap Over Flap Separation Settled | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-SpecialEpisode-12.15.25

AirborneNextGen-
12.16.25

Airborne-Unlimited-12.10.25

Airborne-AffordableFlyers-12.11.25

AirborneUnlimited-12.12.25

AFE 2025 LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Wed, Jul 02, 2003

Flap Over Flap Separation Settled

Air NZ Didn't Do It: Report

New Zealand's Transport Accident Investigation Commission has released its report on the loss of a flap from an ANZ 747 last August. The attachment link came under suspicion, and was found to have been the first point of failure; Boeing has since redesigned the link. ANZ was not found to have done anything wrong in the incident; no one was hurt, as the 372 people made it into LAX, OK.

The TAIC Report:

Boeing 747-419, ZK-NBS, flight NZ 2, in-flight flap separation over Manukau Harbour by Auckland International Airport On Friday 30 August 2002 at 2120, ZK-NBS (flight NZ 2), a Boeing 747-419, took off from runway 23 at Auckland International Airport for Los Angeles. On board were 355 passengers and 17 crew, including 3 pilots on duty in the cockpit.

During a left turn shortly after departure at night, with the flaps still extended to the take-off setting, about 70% of the right inboard trailing edge fore flap separated from the aircraft. The pilots did not receive any cockpit indications of anything untoward and only felt some slight bumps they thought to be from turbulence. The crew were unaware of the separation until the landing approach at Los Angeles some 12 hours later, when the flaps were selected for landing. The pilots took the appropriate action and carried out a go around procedure. The aircraft was repositioned for a further approach and landed safely. The safety of the aircraft and its occupants was not compromised by the incident. No one was injured.

The flap separated because its inboard attachment link failed. The link failed because a pre-existing stress corrosion crack had grown to a critical size, probably in a short period of time. The operator had inspected the flap assembly routinely and specifically as the aircraft manufacturer required, but neither the start of the crack nor its growth could be detected during those inspections.

A safety issue identified was the design adequacy of the fore flap attachment links. The aircraft manufacturer has completed a design change to overcome the limitations of the links.

FMI: www.taic.org.nz/aviation/02-010.pdf

Advertisement

More News

ANN's Daily Aero-Term (12.13.25): Light Gun

Light Gun A handheld directional light signaling device which emits a brilliant narrow beam of white, green, or red light as selected by the tower controller. The color and type of>[...]

Aero-News: Quote of the Day (12.13.25)

“We have performed extensive ground testing by comparing warm up times, full power tethered pulls, and overall temperatures in 100 degree environments against other aircraft >[...]

NTSB Final Report: Gippsland GA-8

While Taxiing To Parking The Right Landing Gear Leg Collapsed, Resulting In Substantial Damage Analysis: The pilot made a normal approach with full flaps and landed on the runway. >[...]

Classic Aero-TV: Historically Unique -- Marlin Horst's Exquisite Fairchild 71

From 2014 (YouTube Edition): Exotic Rebuild Reveals Aerial Work Of Art During EAA AirVenture 2014, ANN's Michael Maya Charles took the time to get a history lesson about a great ai>[...]

Airborne 12.12.25: Global 8000, Korea Pilot Honors, AV-30 Update

Also: Project Talon, McFarlane Acquisition, Sky-Tec Service, JPL Earth Helo Tests Bombardier has earned a round of applause from the business aviation community, celebrating the fo>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC