AD: GE Aviation Czech s.r.o. | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Fri, Nov 05, 2021

AD: GE Aviation Czech s.r.o.

AD 2021-20-21 Required An Adjustment Of The Engine Push-Pull Control And Replacement Of The Beta Switch

The FAA is superseding Airworthiness Directive (AD) 2018-16-10 which applied to certain GE Aviation Czech s.r.o. (GEAC) H80-200 model turboprop engines.

AD 2018-16-10 required an adjustment of the engine push-pull control and replacement of the beta switch to prevent the propeller governor control from going to a negative thrust position. This AD requires an initial inspection and adjustment of the engine push-pull control and replacement of the beta switch. This AD also requires inspection and adjustment of the engine push-pull control after any maintenance, repair or modification that affects the push-pull control and installation of an improved push-pull control. This AD also expands the applicability to include GEAC H85-200 model turboprop engines with Avia Propeller AV-725 propellers installed. This AD was prompted by an accident involving an Aircraft Industries (AI) L 410 UVP-E20 airplane caused by one propeller going to a negative thrust position during the landing approach. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 18, 2021.

Supplementary Information: The FAA issued AD 2018-16-10, Amendment 39-19350 (83 FR 43742, August 28, 2018) (AD 2018-16-10), for certain GE Aviation Czech H80-200 model turboprop engines. AD 2018-16-10 required replacement of the beta switch and adjustment of the engine push-pull control to prevent the propeller governor control from going to a negative thrust position. AD 2018-16-10 resulted from an accident involving an AI L 410 UVP-E20 airplane caused by one propeller going to a negative thrust position during the landing approach. The FAA issued AD 2018-16-10 to require engine modification to prevent asymmetric thrust. The unsafe condition, if not addressed, could result in failure of the beta switch, loss of engine thrust control, and reduced control of the airplane.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC