Cobham Helicopter Stability, Autopilot System Receives First FAA Certification | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Nov 25, 2009

Cobham Helicopter Stability, Autopilot System Receives First FAA Certification

Robinson 44 Is First, Other Models To Follow

Cobham's HeliSAS two-axis helicopter stability and autopilot system has received its first Supplemental Type Certification (STC) from the FAA for use in a Robinson model R44 aircraft. Working with Hoh Aeronautics, Inc. of Lomita, California, Cobham is in the process of achieving HeliSAS certification for use on the Bell 206, Bell 407, Eurocopter AS350, and U.S. Navy's Bell-made TH-57 helicopters.

HeliSAS is a two-axis attitude hold, attitude command, flight control system. The system has two basic functions, a Stability Augmentation System (SAS) to aid with aircraft stability and autopilot outer loop control modes for altitude hold, heading select and navigation sensor coupling. The SAS and Autopilot System provide a significant reduction in pilot workload, from takeoff to landing.

The HeliSAS system offers a number of advantages over previously-certified helicopter autopilot systems in terms of its ease-of-installation and competitive pricing.  In addition, HeliSAS' parallel design requires fewer components, significantly reducing system weight.  These factors combine to make HeliSAS particularly well-suited for helicopters with hydraulic control systems.  It provides helicopter pilots with precise control during all modes of flight, regardless of wind conditions or shifts in weight. The system is designed to be engaged at all times: "on" before takeoff and "off" after landing, resulting in a significantly reduced pilot workload.

The "outer loop" or autopilot functions, once reserved for higher priced and more complex stabilization systems, are included in the HeliSAS system:

  • Heading select and hold
  • Altitude hold
  • ILS localizer and glide slope capture and tracking, including back course
  • VOR capture and tracking
  • GPS steering
  • LVAV/VNAV approach capability
FMI: www.cobham.com/helisas

Advertisement

More News

NTSB Prelim: Piper PA-23

Pilot Also Reported That Due To A Fuel Leak, The Auxiliary Fuel Tanks Were Not Used On June 4, 2025, at 13:41 eastern daylight time, a Piper PA-23, N2109P, was substantially damage>[...]

Classic Aero-TV: One Man’s Vietnam

From 2023 (YouTube Edition): Reflections on War’s Collective Lessons and Cyclical Nature The exigencies of war ought be colorblind. Inane social-constructs the likes of racis>[...]

NTSB Final Report: Capella Aircraft Corp FW1C50

Pilot Reported That He Was Unfamiliar With The Single Seat Amateur-Built Airplane And His Intent Was To Perform High-Speed Taxi Testing Analysis: The pilot reported that he was unf>[...]

Classic Aero-TV: Timber Tiger Touts Curtiss Jenny Replicas

From 2023 (YouTube Edition): First Kits to Ship October 2023 Having formerly resurrected the storied shape of the Ryan ST—in effigy, anyway—Montrose, Colorado-based Tim>[...]

ANN's Daily Aero-Term (07.04.25): Performance-Based Navigation (PBN) [ICAO]

Performance-Based Navigation (PBN) [ICAO] Area navigation based on performance requirements for aircraft operating along an ATS route, on an instrument approach procedure or in a d>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC