AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.02.25

Airborne-NextGen-06.03.25

AirborneUnlimited-06.04.25

Airborne-AffordableFlyers-06.05.25

AirborneUnlimited-06.06.25

Mon, Apr 12, 2021

AD: Airbus SAS Airplanes

AD 2021-08-09 Prompted By The Discovery Of An Erroneous Value In Some Airplane Data Files

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-323, -342, and -343 airplanes.

This AD was prompted by the discovery of an erroneous value in some airplane data files that are used for performance computations in the airplane flight manual (AFM). This AD requires revising the existing AFM and applicable corresponding operational procedures, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective April 23, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2021-0071, dated March 12, 2021 (EASA AD 2021-0071) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Airbus SAS Model A330-323, -342, and -343 airplanes.

This AD was prompted by the discovery of an erroneous value in some airplane data files used for AFM performance computations. This erroneous value could result in the generation of an incorrect displacement drag in the take-off, accelerate-stop, and landing distance computations for particular situations. The FAA is issuing this AD to prevent these errors, which, in combination with one engine inoperative at takeoff, and with more than 50 mm dry snow at an airport within an AFM altitude between 8,000 and 12,500 feet, could lead to substantially reduced performance of the airplane and possible runway overrun, and consequent damage to the airplane and injury to occupants. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (06.02.25): Minimum Friction Level

Minimum Friction Level The friction level specified in AC 150/5320-12, Measurement, Construction, and Maintenance of Skid Resistant Airport Pavement Surfaces, that represents the m>[...]

ANN's Daily Aero-Linx (06.02.25)

Aero Linx: Airpower Museum The APM owns 30 acres on Antique Airfield, including the south half of the N-S runway. It consists of three hangars, an annex, and a library. The museum >[...]

NTSB Prelim: Champion 7ECA

Patient Told The First Responders That The “Man Who Was In The Plane Was Flying At The Time Of The Accident And Had Overshot The Runway They Were Attempting To Land On.&rdquo>[...]

Classic Klyde Morris (From 06.10.22)

Klyde Just Can't Believe This Has Gotten To This Point... FMI: www.klydemorris.com>[...]

Airborne 05.30.25: Anti-Helicopter Bill, PW Strike Done, All-Electric Bristell

Also: Duffy Wants $$$, KS Airports, Morningside U’s Aviation School, New Airstrip In ID After 6 were killed in a helicopter crash over the Hudson River, several US Representa>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC