Ultra-Prop II: Revolutionizing Aviation with Cutting-Edge Technology | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.17.24

Airborne-NextGen-06.18.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Sat, Apr 13, 2024

Ultra-Prop II: Revolutionizing Aviation with Cutting-Edge Technology

Refined Propeller Builds on a Classic to Offer a Lightweight, Affordable Performer

Sun 'n Fun is, as ever, the perfect start to a spring full of flight, as everyone brings their A-game to dominate headlines in the sport aviation scene. The newest contender for best-of-show is Ultraprops and their Ultra-Prop II, a new, lightweight design aimed at ultralights and experimentals.

Building on the original Ultra-Prop from the 80s, Ultra-Prop (the company) had plenty of know-how to work with. The original design was limited to 4 blades at most, but now builds up to 6 blades cover a range of high-power applications. The new prop sports an improved pitch block and hub design, allowing them to pack a more efficient, longer blade. It's even more durable thanks to advancements in material science and engineering: Ultra-Prop tested it to the required 2X loads and consistent overspeed tests without failure. Thanks to the affordable carbon fiber composition of the new Ultra-Prop II, it manages to slot in much cheaper than legacy options like the original Ultra-Prop or wooden Ultralight offerings.

The new Ultra-Prop II aims to strike the optimal balance between efficiency, weight, and performance in all phases of flight. The Ultra-Prop II sports enough adjustability to fine-tune the pitch as desired, with a variety of pitch blocks offered from 8 to 13 degrees. Ultra-Prop adds no twist to its blades, so those block measurements essentially fairly comparable to blade angles on traditional offerings. On the installation side, the Ultra Prop II is a good fit for Rotax 447s, 503s, 582, 912ULs, Hirth 2702/2703s, MZ201s, Kawasaki 440s, and HKS engines.

FMI: www.ultra-prop.com

Advertisement

More News

USCG MH-60 To The Rescue (Again) -- Rescues 4 Boaters

Capsized Vessel Located Near Dauphin Island, Alabama The Coast Guard rescued four boaters after their vessel capsized near Dauphin Island, Alabama, Thursday. Coast Guard District E>[...]

Gray Eagle Order Placed for Army National Guard

Reserve Components Looking to Improve In-House General Atomics Aeronautical Systems announced a fresh order for a dozen Gray Eagle 25M UAVs with accompanying equipment, for fulfill>[...]

Aero-Biz Survival 101 (1120a): Expert Ideas To Help You Through Tough Times

Brand New! Avoid The Need For A Comeback... Get Your Marketing Right, Right Now! Some time ago, the Aero-News Network, responding to numerous requests, established a marketing and >[...]

Airborne 06.03.24: Rotax 915/916 SB, Starship 4 Ready?, B-17 Mementos

Also: Hubble On Pause, FedEx Pilots Picket, Nexus eVTOL, VFS Honors The Rotax folks have published a Service Bulletin after issues were noted that may affect all R915i and R916i se>[...]

Mid-Continent Instruments and Avionics Mourns Former Leader

John W. Winter of AEA and Avionic Fame Passes John W. Winter brought Mid-Continent Instrument Company into the modern era in 1980, purchasing the firm and using it as a base for ex>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC