AD NUMBER: 2008-26-10
MANUFACTURER: Cessna
SUBJECT: Airworthiness Directive 2008-26-10
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company(Cessna) 172, 175, 177, 180, 182, 185, 188, 206, 207, 208, 210, 303, 336, and 337 series airplanes. This AD requires you to inspect the alternate static air source selector valve to assure that the part number identification placard does not obstruct the alternate static air source selector valve port. If the part number identification placard obstructs the port, this AD also requires you to remove the placard, assure that the port is unobstructed, and report to the FAA if obstruction is found. This AD results from reports of airplanes found with alternate static air source selector valve port obstruction caused by improper installation of the part number identification placard. The actions specified by this AD are intended to prevent erroneous indications from the altimeter, airspeed, and vertical speed indicators, which could cause the pilot to react to incorrect flight information and possibly result in loss of control.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/