Columbia, MO Airport Reopens To GA And Passenger Service | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Sat, Apr 20, 2019

Columbia, MO Airport Reopens To GA And Passenger Service

Emergency Runway Alterations Completed, But Questions Remain About Who Will Pay For Them

Emergency runway alterations have been completed at Columbia (MO) Regional Airport (KCOU), reopening the field to both GA and scheduled passenger service.

The airport had been closed a week ago Monday after airport officials say two of the three airlines that serve the airport suspended operations because of problems with the main runway. The crown of the main runway at the intersection with the secondary runway was causing rough landings, the airlines said. The crown was milled down over the course of the last week and the runway was repaved.

The problems came to light when the 6,500-foot main runway was closed on April 1 as the city began a $6 million project to refurbish and lengthen it. The crossing runway was rebuilt two years ago and lengthened to 5,500 feet, and was being used by the airlines while construction was being done on the main runway.

The milling and repaving project cost about $500,000, and The Columbia Daily Tribune reports that interim City Manager John Glascock said that the FAA would be required to pay for the repairs. But FAA regional spokeswoman Elizabeth Cory said in an email to the paper that federal funding is not automatic, and an AIP grant would not cover the full cost of the project.

In the email sent to the paper, Cory raised questions about Glascock's assumption that the FAA would pay for the modifications. But Glascock told the board of Regional Economic Development Inc. that the crown is necessary to drain water off the runway, and was built to federal specifications. Cory said that the FAA does not require drainage crowns to continue through a runway intersection. "FAA design standards call for designers to, 'Provide a smooth transition between intersecting pavement surfaces as well as adequate drainage of the intersection,'" she wrote.

She also questioned why the crown had suddenly become a problem 18 months after the project was complete.

The intersection was created when the secondary runway was extended. That runway had previously terminated where it joined the main runway at a skewed angle, according to the report.

FMI: Source report

Advertisement

More News

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Aero-News: Quote of the Day (06.12.24)

“The legislation now includes a task force with industry representation ensuring that we have a seat at the table and our voice will be heard as conversations about the futur>[...]

ANN's Daily Aero-Linx (06.12.24)

Aero Linx: Waco Museum The WACO Historical Society, in addition to preserving aviation's past, is also dedicated and actively works to nurture aviation's future through its Learnin>[...]

ANN's Daily Aero-Term (06.12.24): Adcock Range

Adcock Range National low-frequency radio navigation system (c.1930-c.1950) replaced by an omnirange (VOR) system. It consisted of four segmented quadrants broadcasting Morse Code >[...]

Airborne Affordable Flyers 06.06.24: 200th ALTO, Rotax SB, Risen 916iSV

Also: uAvionix AV-Link, Does Simming Make Better Pilots?, World Games, AMA National Fun Fly Czech sportplane manufacturer Direct Fly has finished delivering its 200th ALTO NG, the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC