NTSB Final Report: Rutan Long-EZ | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-08.18.25

Airborne-NextGen-08.12.25

AirborneUnlimited-08.13.25

Airborne-AffordableFlyers-08.14.25

AirborneUnlimited-08.15.25

Thu, Aug 21, 2025

NTSB Final Report: Rutan Long-EZ

(Pilot) Heard A Loud “Bang” As The Nose Gear Collapsed And The Nose Continued To Settle, Sliding Down The Runway Surface

Location: Bullhead City, Arizona Accident Number: WPR23LA340
Date & Time: September 5, 2023, 16:20 Local Registration: N58JB
Aircraft: Rutan Long-EZ Aircraft Damage: Substantial
Defining Event: Landing gear collapse Injuries: 1 None
Flight Conducted Under: Part 91: General aviation - Personal

Analysis: The pilot stated that when he touched down, the main landing gear contacted the runway surface, followed by the nose gear. He instantly heard a loud “bang” as the nose gear collapsed and the nose continued to settle, sliding down the runway surface. 

Examination of the nose gear revealed that the nose landing gear actuator failed due to the buckling and fracture of the ball screw, which resulted from compressive loads on the actuator assembly. These compressive loads were likely from vertical and/or aft loads on the nose wheel. The actuator was likely in the fully extended position, but the length of the accident actuator was longer than its design length at full extension. Issues with the actuator installation that might have contributed to the overextension could not be determined. 

The examination further revealed that the nose landing gear likely sustained a relatively hard landing while in the fully extended position. However, the additional length in the overextended actuator assembly made the ball screw susceptible to buckling failure from lower compressive loads than designed. Additionally, since less length of the extension tube was constrained by the housing in the overextended assembly, the reduced constraint likely made the assembly susceptible to buckling at even lower loads. The assembly’s extension beyond its design length likely contributed to the failure, as the extension would have diminished the safety margin and increased the vulnerability to buckling failure under high landing loads. 

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- The pilot’s improper flair resulting in a hard landing.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (08.21.25): Localizer Performance With Vertical Guidance

Localizer Performance With Vertical Guidance (LPV) A type of approach with vertical guidance (APV) based on WAAS, published on RNAV (GPS) approach charts. This procedure takes adva>[...]

NTSB Final Report: Rutan Long-EZ

(Pilot) Heard A Loud “Bang” As The Nose Gear Collapsed And The Nose Continued To Settle, Sliding Down The Runway Surface Analysis: The pilot stated that when he touched>[...]

Classic Aero-TV: Living the Dream – ANG’s John Klatt Performs at EAA

From 2010 (YouTube Edition): Aero-TV Takes to the Skies Alongside ANG’s John Klatt John Klatt is a man who truly lives and breathes aviation. As the pilot for John Klatt Airs>[...]

Airborne 08.18.25: Unlimiteds Cancel NCAR25, Starship 10, No ATC Privatization

Also: Solar-Powered Record, IAM Appeals, Airshow Pilot Lost, Air India Flamed The Unlimited Class recently confirmed that it would be withdrawing from this year’s National Ch>[...]

Airborne Affordable Flyers 08.14.25: Affordable Flying Expo, RV15 Kit, Spirit V2

Also: iFly EFB, World Skydiving Day, Air Avionics, Two New CubCrafters Kits After a master strategy meeting this past week on the grounds of the Sun n Fun Aerospace Expo campus, de>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC