Zenith Aircraft Returns with Builder's Workshop at Wheels & Wings | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.12.25

Airborne-NextGen-05.13.25

AirborneUnlimited-05.14.25

Airborne-FlightTraining-05.15.25

AirborneUnlimited-05.16.25

Sat, Oct 15, 2022

Zenith Aircraft Returns with Builder's Workshop at Wheels & Wings

Hands-On Opportunity to Pick up Aircraft Building Skills with the Experts at Florida's Cannon Creek Airpark

Zenith Aircraft will once again host its popular hands-on kit aircraft building workshop, taking to Wheels & Wings at Cannon Creek Airpark of northern Florida. 

The course runs from December 2-3, and will provide all the needful to complete the rudder tail section of a Zenith aircraft from a standard kit, often completed within the first day or by the next morning. The process is a good choice to hone important skills for a home builder, from reading drawings and enacting assembly instructions to drilling and riveting the skin of the rudder. By the end, participants will have completed a ready-to-install rudder section for their own aircraft and picked up some of the most vital builder skills under the watchful eye of the manufacturers themselves. 

Attendees may come with additional  kids, spouses, or sufficiently trained helper monkeys for no additional fee. A modest upcharge for the CH 750 Super Duty kit brings the total to $425, or $375 for the basic rudder kit (CH 750 STOL/Cruzer) and workshop experience. On December 3rd, the second day of the workshop, Cannon Creek Airpark will hold a Zenith fly in and Open House at Wings & Wheels. 

For those who can't make it, Zenith Aircraft will hold one of its regular workshop classes at its kit factory in Mexico, Missouri from December 1 to 2. That workshop experience includes a more fleshed out experience that includes a factory tour, demo flight, and graduation ceremony for attendees who complete their rudder section. Given the factory location, the workshop has a slightly wider roster of options, with attendees able to choose from the high wing CH 750 series or the low wing CH 650 cruiser for their project. 

FMI: www.zenithair.com

Advertisement

More News

ANN's Daily Aero-Linx (05.16.25)

Aero Linx: International Federation of Air Traffic Controllers' Associations (IFATCA) IFATCA is the recognised international organisation representing air traffic controller associ>[...]

Aero-News: Quote of the Day (05.16.25)

“The BlackBird is more than a demonstrator—it’s a flying testbed for the future of aviation. To see it take flight in such a short time is a testament to our team>[...]

ANN's Daily Aero-Term (05.16.25): Glideslope Intercept Altitude

Glideslope Intercept Altitude The published minimum altitude to intercept the glideslope in the intermediate segment of an instrument approach. Government charts use the lightning >[...]

Airborne-NextGen 05.13.25: Merlin Tests, Dronetag Accuses, Flying Car?

Also: MQ-9B UAS MTC, FlightSimExpo, New JPL Director, Japanese Lunar Lander Preps Merlin’s flight testing campaign continues to rapidly progress with its certification-ready >[...]

Classic Aero-TV: Jabiru's New J170-D - An Upgraded and Fine-tuned LSA

From 2017 (YouTube Edition): The Airplane From Down Under Is A Proven Trainer… Jabiru was one of the early light sport aircraft (LSA) brought into the U.S.A. when the sport >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC