FAA Issues Emergency AD For Some Bell Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Tue, Dec 14, 2010

FAA Issues Emergency AD For Some Bell Helicopters

Supersedes Existing AD Dealing With Tail Rotor Tip Weights

The FAA is superseding a previous AD with an Emergency AD for Bell Helicopter Textron Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters.


Bell 412 File Photo

The superseding EAD is prompted by another incident in which the tail rotor blade (blade) tip weight separated from a blade during flight causing vibration. This unsafe condition led to the determination that additional blades could be affected and should be added to the applicability. The actions specified by this AD are intended to prevent loss of the blade tip weight, loss of a blade, and subsequent loss of control of the helicopter.

On October 31, 2007, the FAA issued AD 2007-19-53 which requires, before further flight, removing and replacing each affected blade with an airworthy blade. That action was prompted by three reports of blade tip weights being slung from the blades during flights, causing significant vibration.

The FAA says it has reviewed the following revised BHT Alert Service Bulletins (ASBs), all dated November 22, 2010 except where noted otherwise. Each Alert Service Bulletin (ASB) contains an RBI letter that adds blade serial numbers to the RBI list.

  • No. 204-07-61, Revision A, dated September 19, 2007, for Model 204 helicopters;
  • No. 205-07-95, Revision B, for Model 205 helicopters;
  • No. 205B-07-46, Revision B, for Model 205B helicopters;
  • No. 212-07-125, Revision B, for Model 212 helicopters;
  • No. 412CF-07-123, Revision B, for Model 412CF helicopters;
  • No. 412-07-123, Revision B, for Model 412 and 412EP helicopters.

The FAA says it is issuing this AD because we evaluated all information and determined the unsafe condition exists and is likely to exist or develop on other helicopters of these same type designs. Since the unsafe condition is likely to exist or develop on other helicopters of these same type designs, this AD requires, before further flight, unless already accomplished, replacing any affected blade with an airworthy blade.

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/29D12391ECD3F47A862577F50079AB79?OpenDocument

Advertisement

More News

ANNouncement: Now Accepting Applications For Oshkosh 2024 Stringers!!!

An Amazing Experience Awaits The Chosen Few... Oshkosh, to us, seems the perfect place to get started on watching aviation recover the past couple of years... and so ANN is putting>[...]

Aero-News: Quote of the Day (06.13.24)

“NBAA has a tremendous responsibility to the business aviation industry, and we are constantly collaborating with them. Our flight departments, professionals and aircraft own>[...]

ANN's Daily Aero-Term (06.13.24): Dead Reckoning

Dead Reckoning Dead reckoning, as applied to flying, is the navigation of an airplane solely by means of computations based on airspeed, course, heading, wind direction, and speed,>[...]

ANN's Daily Aero-Linx (06.13.24)

Aero Linx: Vertical Aviation Safety Team (VAST) We are a public–private initiative to enhance worldwide flight operations safety in all segments of the vertical flight indust>[...]

ANN FAQ: How Do I Become A News Spy?

We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC