AD: Airbus Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Apr 29, 2015

AD: Airbus Airplanes

AD NUMBER: 2015-08-08

PRODUCT: Certain Airbus Model A319-115, A319-133, A320-214, A320-232, and A320-233 airplanes.

ACTION: Final Rule

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2014-26-53 and AD 2015-03-02 for the products listed above.

AD 2014-26-53 required repetitive detailed visual inspections to detect discrepancies of the wing lower skin surface and inboard main landing gear (MLG) support rib lower flange location fasteners and, depending on findings, accomplishment of applicable corrective action(s).

AD 2015-03-02 required repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. This new AD retains the repetitive detailed visual inspections to detect discrepancies of the fasteners located in the wing lower skin surface and inboard MLG support rib lower flange with extended compliance times and repetitive intervals, and accomplishment of applicable corrective actions.

This new AD also retains the repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. In addition, this new AD adds airplanes to the applicability. This AD was prompted by a determination that certain airplanes were missing from the applicability of AD 2014-26-53 and AD 2015-03-02 and that those airplanes may be affected by the unsafe condition addressed in AD 2014-26-53 and AD 2015-03-02.

The FAA is issuing this AD to detect and correct discrepancies of the fasteners at the external surface of the lower wing skin and inboard and outboard MLG support rib lower flanges, which could result in an airplane not meeting its maximum loads expected in service. This condition could result in structural failure.

DATES: This AD becomes effective May 12, 2015.

FMI: AD

Advertisement

More News

NTSB Prelim: Piper PA-23

Pilot Also Reported That Due To A Fuel Leak, The Auxiliary Fuel Tanks Were Not Used On June 4, 2025, at 13:41 eastern daylight time, a Piper PA-23, N2109P, was substantially damage>[...]

Classic Aero-TV: One Man’s Vietnam

From 2023 (YouTube Edition): Reflections on War’s Collective Lessons and Cyclical Nature The exigencies of war ought be colorblind. Inane social-constructs the likes of racis>[...]

NTSB Final Report: Capella Aircraft Corp FW1C50

Pilot Reported That He Was Unfamiliar With The Single Seat Amateur-Built Airplane And His Intent Was To Perform High-Speed Taxi Testing Analysis: The pilot reported that he was unf>[...]

Classic Aero-TV: Timber Tiger Touts Curtiss Jenny Replicas

From 2023 (YouTube Edition): First Kits to Ship October 2023 Having formerly resurrected the storied shape of the Ryan ST—in effigy, anyway—Montrose, Colorado-based Tim>[...]

ANN's Daily Aero-Term (07.04.25): Performance-Based Navigation (PBN) [ICAO]

Performance-Based Navigation (PBN) [ICAO] Area navigation based on performance requirements for aircraft operating along an ATS route, on an instrument approach procedure or in a d>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC