NTSB Prelim: Bell UH 1H | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Thu, Jun 11, 2020

NTSB Prelim: Bell UH 1H

Witness: The Tail Rotor Separated From The Helicopter

Location: Mesa, AZ Accident Number: WPR20LA130
Date & Time: 04/24/2020, 1600 MST Registration: N3276T
Aircraft: Bell UH 1H Injuries: 1 Fatal, 1 Serious
Flight Conducted Under: Part 91: General Aviation - Positioning

On April 24, 2020, about 1600 mountain standard time, a Bell UH-1H helicopter, N3276T, was substantially damaged when it was involved in an accident in Mesa, Arizona. The pilot was fatally injured, and the passenger was seriously injured. The helicopter was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 relocation flight.

Witnesses reported they observed the helicopter flying low towards Falcon Field Airport (FFZ), Mesa, Arizona, with white smoke coming from the rear rotor area. Suddenly, the tail rotor separated from the helicopter and landed in a dirt lot below. The helicopter continued northeast as it started to spin and impact the ground.

On scene examination by a Federal Aviation Administration Inspector indicated that the debris field was about 1/2 mile, extending along a generally northeast direction. The first identified piece of debris were fragments of glass, which were consistent with a navigation light on the vertical stabilizer. About 200 yards further northeast was the tail rotor assembly, and the input pinion gear assembly. The rest of the helicopter came to rest about ½ mile further northeast in an open, slightly sloped field. The first pieces of debris in the field were the vertical stabilizer and a portion of the horizontal stabilizer followed by two long and narrow ground strikes consistent with main rotor blade strikes. Immediately following this area was the main wreckage; the helicopter came to rest slightly nose, and left side low, along a heading of about 49 degrees. The helicopter exhibited upward crushing throughout the cabin and fuselage, most extensively on the left side of the fuselage. The mast and the main transmission were displaced forward, and the main rotor assembly was fracture separated. The main rotor blade assembly was the last major piece of debris located about 20 yards northeast of the main wreckage.

The helicopter has been recovered to a secure location for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Aero-News: Quote of the Day (06.12.24)

“The legislation now includes a task force with industry representation ensuring that we have a seat at the table and our voice will be heard as conversations about the futur>[...]

ANN's Daily Aero-Linx (06.12.24)

Aero Linx: Waco Museum The WACO Historical Society, in addition to preserving aviation's past, is also dedicated and actively works to nurture aviation's future through its Learnin>[...]

ANN's Daily Aero-Term (06.12.24): Adcock Range

Adcock Range National low-frequency radio navigation system (c.1930-c.1950) replaced by an omnirange (VOR) system. It consisted of four segmented quadrants broadcasting Morse Code >[...]

Airborne Affordable Flyers 06.06.24: 200th ALTO, Rotax SB, Risen 916iSV

Also: uAvionix AV-Link, Does Simming Make Better Pilots?, World Games, AMA National Fun Fly Czech sportplane manufacturer Direct Fly has finished delivering its 200th ALTO NG, the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC