FAA SAIB For PW4000 Engines Revised | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Jan 20, 2016

FAA SAIB For PW4000 Engines Revised

Follows Reports Of Two Failures Of PW4000-94 Model Engines

The FAA has issued a revised Special Airworthiness Information Bulletin (SAIB) for PW4000 engines following two reports of LPT 4th stage vane liberations, which have resulted in two engine failures with low-energy case uncontainment events on PW4000-94 model engines. In both cases, the pilots of the airplanes that suffered the engine failures made safe landings.

Investigations revealed sulfidation of the vane internal passages corroding the parent material, weakening the structure and inducing lean back or liberation of vane clusters.

This SAIB provides information on LPT 4th stage vane fractures and lists service information intended to prevent further occurrences of vane weakening and possible engine failure. PW4000 series engine Clean, Inspect, Repair (CIR) Manual, P/N 51A357, Task No. 72-53-24-200-002, dated January 15, 2015 was issued to inspect the LPT 4th stage vane airfoil permeability using a magnetoscope. This method is indicated because the material degradation occurs largely from the inside of the vane passages. While general borescope inspection is useful to identify sulfidation of the external airfoil surfaces, it is unable to detect deterioration of internal surfaces prior to failure of the part. Magnetoscope inspection allows for the remainder of the unaffected airfoil material to be measured by nondestructive means.

The FAA recommends that upon piece part exposure of LPT 4th stage vanes with a hollow internal airfoil configuration you perform a magnetoscope inspection per the instructions in PW4000 series engine CIR Manual, P/N 51A357, Task No. 72-53-24-200-002, dated January 15, 2015 and remove the degraded parts.

(Image from file)

FMI: SAIB

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC