NTSB Prelim: Cirrus Design Corp SR22 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-10.20.25

AirborneNextGen-
10.21.25

Airborne-Unlimited-10.22.25

Airborne-FltTraining-10.23.25

AirborneUnlimited-10.17.25

Fri, Oct 18, 2024

NTSB Prelim: Cirrus Design Corp SR22

After The Airplane Exited The Left Side Of The Runway It Continued Into A Tree...

Location: Lakeway, TX Accident Number: CEN24LA367
Date & Time: September 25, 2024, 18:33 Local Registration: N565CP
Aircraft: Cirrus Design Corp SR22 Injuries: 1 Serious, 1 Minor
Flight Conducted Under: Part 91: General aviation - Personal

On September 25, 2024, at 1833 central daylight time, a Cirrus SR22 airplane, N565CP, was substantially damaged when it was involved in an accident near Lakeway, Texas. The pilot sustained minor injuries and the passenger sustained serious injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot reported that he entered the traffic pattern at Lakeway Airpark (3R9), Lakeway, Texas. The closest weather reporting station indicated wind from 030° at 10 knots gusting to 16 knots, so he planned to land on runway 34. While on the base leg he extended full flaps and reduced the power to 30%. While on final approach and after clearing a set of powerlines that were perpendicular to the runway, he made a steeper approach to the runway. Once the airplane was above the displaced threshold, the nose suddenly pitched down so the pilot increased power, but the airplane bounced and veered off the left side of the runway. 

The responding Federal Aviation Administration (FAA) inspector and representatives from Cirrus Aircraft reported that there were three distant gouges in the runway where the landing gear impacted during the bounced landing. After the airplane exited the left side of the runway it continued into a tree, then came to rest in the grass between two homes. The engine and left wing separated from the airplane during the accident sequence. The position of the flap actuator indicated that the flaps were fully extended. 

The airplane was equipped with a Garmin G1000 Integrated Flight Deck and a Heads Up Technologies recoverable data module (RDM) data recorder. Flight data recorded by these devices were downloaded and will be reviewed. 

The airplane was retained for further examination. 

FMI: www.ntsb.gov

Advertisement

More News

Affordable Flying Expo Announces Industry MOSAIC Town Hall

Scheduled for Friday, November 7th at 1800ET, The MOSAIC Town Hall, Webcast At www.airborne-live.net One of the more intriguing features of the 2025 Affordable Flying Expo, schedul>[...]

Classic Aero-TV: Composite-FX Sets Elevates the Personal Helicopter Market

From 2023 (YouTube Edition): The Mosquito Evolves Formerly known as Mosquito, Trenton, Florida-based Composite FX is a designer and manufacturer of personal kit and factory-finishe>[...]

Aero-News: Quote of the Day (10.25.25)

“The Board is pleased to name Lisa as our next CEO after conducting a comprehensive succession planning process and believes this transition will ensure continued success for>[...]

ANN's Daily Aero-Term (10.25.25): Ground Stop (GS)

Ground Stop (GS) The GS is a process that requires aircraft that meet a specific criteria to remain on the ground. The criteria may be airport specific, airspace specific, or equip>[...]

NTSB Final Report: Gallow Daniel A Kitfox Classic IV

The Airplane Stalled Above The Runway Threshold, The Nose Dropped, The Nose Wheel Impacted The Runway, And The Airplane Flipped Over Analysis: The pilot reported that during the fi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC