AD: GE Aviation Czech s.r.o. | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Fri, Nov 05, 2021

AD: GE Aviation Czech s.r.o.

AD 2021-20-21 Required An Adjustment Of The Engine Push-Pull Control And Replacement Of The Beta Switch

The FAA is superseding Airworthiness Directive (AD) 2018-16-10 which applied to certain GE Aviation Czech s.r.o. (GEAC) H80-200 model turboprop engines.

AD 2018-16-10 required an adjustment of the engine push-pull control and replacement of the beta switch to prevent the propeller governor control from going to a negative thrust position. This AD requires an initial inspection and adjustment of the engine push-pull control and replacement of the beta switch. This AD also requires inspection and adjustment of the engine push-pull control after any maintenance, repair or modification that affects the push-pull control and installation of an improved push-pull control. This AD also expands the applicability to include GEAC H85-200 model turboprop engines with Avia Propeller AV-725 propellers installed. This AD was prompted by an accident involving an Aircraft Industries (AI) L 410 UVP-E20 airplane caused by one propeller going to a negative thrust position during the landing approach. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 18, 2021.

Supplementary Information: The FAA issued AD 2018-16-10, Amendment 39-19350 (83 FR 43742, August 28, 2018) (AD 2018-16-10), for certain GE Aviation Czech H80-200 model turboprop engines. AD 2018-16-10 required replacement of the beta switch and adjustment of the engine push-pull control to prevent the propeller governor control from going to a negative thrust position. AD 2018-16-10 resulted from an accident involving an AI L 410 UVP-E20 airplane caused by one propeller going to a negative thrust position during the landing approach. The FAA issued AD 2018-16-10 to require engine modification to prevent asymmetric thrust. The unsafe condition, if not addressed, could result in failure of the beta switch, loss of engine thrust control, and reduced control of the airplane.

FMI: www.regulations.gov

Advertisement

More News

NTSB Prelim: Piper PA-23

Pilot Also Reported That Due To A Fuel Leak, The Auxiliary Fuel Tanks Were Not Used On June 4, 2025, at 13:41 eastern daylight time, a Piper PA-23, N2109P, was substantially damage>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: One Man’s Vietnam

From 2023 (YouTube Edition): Reflections on War’s Collective Lessons and Cyclical Nature The exigencies of war ought be colorblind. Inane social-constructs the likes of racis>[...]

ANN's Daily Aero-Linx (07.03.25)

Aero Linx: Colorado Pilots Association (CPA) Colorado Pilots Association was incorporated as a Colorado Nonprofit Corporation in 1972. It is a statewide organization with over 700 >[...]

ANN's Daily Aero-Term (07.03.25): High Speed Taxiway

High Speed Taxiway A long radius taxiway designed and provided with lighting or marking to define the path of aircraft, traveling at high speed (up to 60 knots), from the runway ce>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC