AD: Piper Aircraft, Inc. Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.24.25

AirborneNextGen-
11.18.25

Airborne-Unlimited-11.19.25

Airborne-AffordableFlyers-11.20.25

AirborneUnlimited-11.21.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Mon, Apr 19, 2021

AD: Piper Aircraft, Inc. Airplanes

AD 2021-09-02 Corrects An Incorrect Modification Kit Part Number

The FAA is superseding Airworthiness Directive (AD) 2021-04-07 which applied to certain Piper Aircraft, Inc., (Piper) Models PA-46-350P (Malibu Mirage), PA-46R-350T (Malibu Matrix), and PA-46-500TP (Malibu Meridian) airplanes.

AD 2021-04-07 required identifying and correcting nonconforming stall warning heat control systems. Since AD 2021-04-07 was issued, the FAA was notified of an error in the stall warning heat control modification kit part number. This AD retains all of the actions in AD 2021-04-07 and corrects the incorrect modification kit part number. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 16, 2021.

Supplementary Information: The FAA issued AD 2021-04-07, Amendment 39-21428 (86 FR 10770, February 23, 2021), (AD 2021-04-07), for certain Piper Models PA-46-350P (Malibu Mirage), PA-46R-350T (Malibu Matrix), and PA-46-500TP (Malibu Meridian) airplanes. AD 2021-04-07 required identifying and correcting nonconforming stall warning heat control systems. AD 2021-04-07 resulted from the finding of airplanes without the proper stall warning heater modification design change. Without the proper stall warning heat control modification kit, during flights into icing conditions with the landing gear down, ice can form on the stall vane, which may result in failure of the stall warning system. The FAA issued AD 2021-04-07 to require identifying and correcting nonconforming stall warning heat control systems, which, if not addressed, could result in the pilot being unaware of an approaching stall situation.

FMI: www.regulations.gov

Advertisement

More News

Airborne 11.24.25: ANN's 30th!, Starship’s V3 Booster Boom, Earhart Records

Also: 1st-Ever Space Crime Was a Fraud, IAE Buys Diamonds, Kennon Bows Out, Perseverance Rover An interesting moment came about this past Sunday as ANN CEO, Jim Campbell, noted tha>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: DeltaHawk Aero Engine Defies Convention

From 2023 (YouTube Edition): Deviation from the Historical Mean Racine, Wisconsin-based DeltaHawk is a privately-held manufacturer of reciprocating engines for aircraft and hybrid >[...]

NTSB Final Report: Glasair GlaStar

Smoke Began Entering The Cockpit During The Landing Flare, And Then The Pilot Noticed Flames On The Right Side Of The Airplane Analysis: The pilot reported that about 30 minutes in>[...]

ANN's Daily Aero-Term (11.22.25): Remote Communications Outlet (RCO)

Remote Communications Outlet (RCO) An unmanned communications facility remotely controlled by air traffic personnel. RCOs serve FSSs. Remote Transmitter/Receivers (RTR) serve termi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC