AD: Dassault Aviation Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-12.08.25

AirborneNextGen-
12.09.25

Airborne-Unlimited-12.10.25

Airborne-AffordableFlyers-12.11.25

AirborneUnlimited-12.12.25

AFE 2025 LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Sun, Oct 17, 2021

AD: Dassault Aviation Airplanes

AD 2021-20-14 Prompted By A Report Of A Manufacturing Issue Involving Misalignment Of A Cabin Seat Pin And Plate

The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes.

This AD was prompted by a report of a manufacturing issue involving misalignment of a cabin seat pin and plate that can prevent the recline locking mechanism from properly engaging when the seat is in taxi, take-off, or landing position. This AD requires an inspection of certain cabin seats for discrepancies and corrective action, as specified in European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 18, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0284, dated December 18, 2020 (EASA AD 2020-0284) (also referred to as the MCAI), to correct an unsafe condition for Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. The NPRM published in the Federal Register on July 15, 2021 (86 FR 37255). The NPRM was prompted by a report of a manufacturing issue involving misalignment of a cabin seat pin and plate that can prevent the recline locking mechanism from properly engaging when the seat is in taxi, take-off, or landing position. The NPRM proposed to require an inspection of certain cabin seats for discrepancies and corrective action, as specified in EASA AD 2020-0284.

The FAA is issuing this AD to address cabin seats having improper or no engagement of the recline locking mechanism during taxi, take-off, or landing, which could result in reduced seat performance under crash loads and possible injury to seat occupants. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (12.12.25)

Aero Linx: Commercial Aviation Safety Team (CAST) Founded in 1997, the Commercial Aviation Safety Team (USCAST) has developed an integrated, data-driven strategy to reduce the comm>[...]

ANN's Daily Aero-Term (12.12.25): Land And Hold Short Operations

Land And Hold Short Operations Operations that include simultaneous takeoffs and landings and/or simultaneous landings when a landing aircraft is able and is instructed by the cont>[...]

ANN FAQ: How Do I Become A News Spy?

We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]

NTSB Final Report: Cirrus Design Corp SF50

Pilot’s Inadvertent Use Of The Landing Gear Control Handle Instead Of The Flaps Selector Switch During The Landing Rollout Analysis: The pilot reported that during the landin>[...]

Airborne 12.08.25: Samaritan’s Purse Hijack, FAA Med Relief, China Rocket Fail

Also: Cosmonaut Kicked Out, Airbus Scales Back, AF Silver Star, Russian A-60 Clobbered A Samaritan’s Purse humanitarian flight was hijacked on Tuesday, December 2, while atte>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC