AD NUMBER: 2007-25-07
MANUFACTURER: Bell
SUBJECT: Airworthiness Directive 2007-25-07
SUMMARY: This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (BHTC) Model 206A and 206B helicopters, serial numbers (S/N) 0004 through 3906, with two-piece vertical stabilizer (fin) supports (fin supports) installed, that requires inserting a revision into the applicable maintenance manual, verifying the torque on the fin support attachment hardware, inspecting the fin support bracket and fins for paint or gaps, and inspecting the fin support bracket for cracking, and if a crack is found, replacing the two-piece vertical fin support with a one-piece casting support.

This amendment is prompted by an accident in which the fin supports failed.

The actions specified by this AD are intended to detect improper torque of the fin supports' attachment hardware, gaps between the fin support bracket and the doubler, painted mating surfaces of the fin supports, vertical fin, and vertical fin inserts (fin inserts), and cracking in the fin supports, to prevent the vertical fin from rotating into the tail rotor, separation of the tail motor, and subsequent loss of control of the helicopter.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/