Qantas A380 Logs 34 Flights with Tool Stuck in Engine | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-02.03.25

Airborne-NextGen-02.04.25

Airborne-Unlimited-02.05.25

Airborne-FlightTraining-02.06.25

Airborne-Unlimited-02.07.25

Mon, Nov 18, 2024

Qantas A380 Logs 34 Flights with Tool Stuck in Engine

4 Foot Nylon Inspection Tool Went Undetected for Weeks

An Airbus A380, operated by Qantas Airways, took 34 flights with an over four-foot-long nylon rod lodged in one of its engines. The tool, which is used to rotate a compressor in the engine during borescope inspections, was accidentally left behind in routine maintenance.

Officials from the Australian Transport Safety Bureau reported that the tool was put in the engine during a three-day scheduled check at Los Angeles International Airport (LAX). The aircraft was taken in on December 6, 2023, and released back into service on December 8, 2023.

The aircraft was downed for another three-day checkup at the LAX maintenance facility on January 1, 2024. Engineers quickly identified and removed the tool in the engine’s low-pressure compressor case. It had been badly deformed from the elements, but the engine is reportedly still in working condition.

In the month between inspections, the A380 took 34 flights and logged 293.74 hours. Just one day after finding the lost device, Qantas launched an internal incident report and began briefing its staff on the importance of keeping track of tools.

The ATSB was quick to question how the maintenance engineers did not notice the tool left behind during their foreign object inspections, which are specifically designed to prevent these situations. It also claimed that the team failed to perform its lost tool procedure or any other follow-ups before sending the aircraft back up for flight.

“Foreign object debris and damage can pose a significant threat to the safe operation of aircraft, which is why regulations, procedures and training are in place to limit the risk of foreign object damage, especially from introduced objects during maintenance,” explained the ATSB incident report. “Correctly applying tool control is fundamental to mitigating against any human errors that may arise.”

FMI: www.atsb.gov.au

Advertisement

More News

ANN's Daily Aero-Term (02.05.25): Execute

Execute Used by ATC when prompt compliance is required to avoid the development of an imminent situation. Expedite climb/descent normally indicates to a pilot that the approximate >[...]

ANN's Daily Aero-Linx (02.05.25)

Aero Linx: Historic Aircraft Association (HAA) The Historic Aircraft Association (HAA) was founded in 1979 with the aim of furthering the safe flying of historic aircraft in the UK>[...]

Aero-News: Quote of the Day (02.05.25)

“Our shareholder’s resounding approval today represents an important milestone in our carefully planned merger with Boeing. As we continue executing our transition plan>[...]

Aero-News: Quote of the Day (02.06.25)

“Our team is constantly seeking ways to enhance our training and performance. We believe that the NX Cub will be invaluable in developing our pilots’ precision flying s>[...]

ANN's Daily Aero-Term (02.06.25): Decision Altitude (DA)

Decision Altitude (DA) A specified altitude (mean sea level (MSL)) on an instrument approach procedure (ILS, GLS, vertically guided RNAV) at which the pilot must decide whether to >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC