AD NUMBER: 2008-06-21 R1

MANUFACTURER: McDonnell Douglas Corporation Model DC- 10-10 and DC-10-10F Airplanes, Model DC-10-15 Airplanes, Model DC-10-30 and DC-10-30F (KC-10A and KDC-10) Airplanes, Model DC-10-40 and DC-10- 40F Airplanes, Model MD-10-10F and MD-10-30F Airplanes, and Model MD-11 and MD-11F Airplanes
SUBJECT: Airworthiness Directive 2008-06-21 R1

SUMMARY: The FAA is revising an existing airworthiness directive (AD), which applies to all McDonnell Douglas Corporation airplane models identified above. That AD currently requires revising the FAA-approved maintenance program, or the Airworthiness Limitations (AWLs) section of the Instructions for Continued Airworthiness, as applicable, to incorporate new AWLs for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. For certain airplanes, this AD also requires the initial accomplishment of a certain repetitive AWL inspection to phase in that inspection, and repair if necessary. This AD clarifies the intended effect of the AD on spare and on-airplane fuel tank system components. This AD results from a design review of the fuel tank system. We are issuing this AD to prevent the potential for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/85A01098EFBE633186257679004D4324?OpenDocument