AD: Airbus Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-Unlimited-05.28.24

Airborne-FlightTraining-05.29.24 Airborne-Unlimited-05.30.24

Airborne-Unlimited-05.24.24

Wed, Apr 29, 2015

AD: Airbus Airplanes

AD NUMBER: 2015-08-08

PRODUCT: Certain Airbus Model A319-115, A319-133, A320-214, A320-232, and A320-233 airplanes.

ACTION: Final Rule

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2014-26-53 and AD 2015-03-02 for the products listed above.

AD 2014-26-53 required repetitive detailed visual inspections to detect discrepancies of the wing lower skin surface and inboard main landing gear (MLG) support rib lower flange location fasteners and, depending on findings, accomplishment of applicable corrective action(s).

AD 2015-03-02 required repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. This new AD retains the repetitive detailed visual inspections to detect discrepancies of the fasteners located in the wing lower skin surface and inboard MLG support rib lower flange with extended compliance times and repetitive intervals, and accomplishment of applicable corrective actions.

This new AD also retains the repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. In addition, this new AD adds airplanes to the applicability. This AD was prompted by a determination that certain airplanes were missing from the applicability of AD 2014-26-53 and AD 2015-03-02 and that those airplanes may be affected by the unsafe condition addressed in AD 2014-26-53 and AD 2015-03-02.

The FAA is issuing this AD to detect and correct discrepancies of the fasteners at the external surface of the lower wing skin and inboard and outboard MLG support rib lower flanges, which could result in an airplane not meeting its maximum loads expected in service. This condition could result in structural failure.

DATES: This AD becomes effective May 12, 2015.

FMI: AD

Advertisement

More News

Aero-News: Quote of the Day (05.28.24)

"Clearing this certification hurdle is a major step forward in providing European CJ customers with a solution that not only enhances their aircraft operations but can also extend >[...]

ANN's Daily Aero-Term (05.28.24): Permanent Echo

Permanent Echo Radar signals reflected from fixed objects on the earth's surface; e.g., buildings, towers, terrain. Permanent echoes are distinguished from “ground clutter&rd>[...]

ANN's Daily Aero-Linx (05.28.24)

Aero Linx: Vintage Sailplane Association The purpose of the Vintage Sailplane Association (VSA) is to promote the acquisition, restoration and flying of vintage sailplanes by its m>[...]

Airborne-NextGen 05.21.24: ‘Liberty Lifter’, Cavorite Flies!, Eurodrone

Also: AMA National Fun Fly, Skyfire SF2, Echodyne Gets BVLOS, Av Meteorology Reference General Atomics' run at developing the Liberty Lifter ground effect aircraft has been put to >[...]

Airborne 05.24.24: NPS Kills Rushmore Flyover, VAI v NYC, New Reno Home-Roswell!

Also: Samson Sky, CAF Great Plains Wing, New Cert Standards, Flying Start Day There are, occasionally, blisteringly dunderheaded bits of governmental incompetence to be found with >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC