AD NUMBER: 2010-13-05

MANUFACTURER: Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700 & 701) Airplanes, Model CL-600-2D15 (Regional Jet Series 705) Airplanes, and Model CL-600-2D24 (Regional Jet Series 900) Airplanes
SUBJECT: Airworthiness Directive 2010-13-05

SUMMARY: This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

Investigation into a landing gear retraction problem on a production test flight revealed that, during aircraft pressurization and depressurization cycles, the pressure floor in the main landing gear bay deflects to a small extent. This causes relative misalignment between the [alternate-extension system] AES bypass valve, the downlock assist valve and the summing lever which, in turn, can result in damage to and potential failure of the respective clevis attached to one or both of the valves. Such a clevis failure could remain dormant and, in the subsequent event that use of the AES was required, full landing gear extension may not be achievable.

The FAA is issuing this AD to require actions to correct the unsafe condition on these products.
 

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/D1BC733535CCE6248625774B00501635?OpenDocument