AD: Saab AB, Support and Services | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Thu, Feb 25, 2021

AD: Saab AB, Support and Services

AD 2021-02-02 Requires An Inspection For Correct Installation Of The MLG Anti-Skid System Harnesses

The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model SAAB 2000 airplanes. This AD was prompted by a report of inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the main landing gear (MLG) wheel axles.

This AD requires an inspection for correct installation of the MLG anti-skid system harnesses and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective March 29, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0137, dated June 18, 2020 (EASA AD 2020-0137) (referred to after this as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Saab AB, Support and Services Model SAAB 2000 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Saab AB, Support and Services Model SAAB 2000 airplanes. The NPRM published in the Federal Register on October 1, 2020 (85 FR 61877). The NPRM was prompted by a report of inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the MLG wheel axles. The NPRM proposed to require an inspection for correct installation of the MLG anti-skid system harnesses and corrective actions if necessary, as specified in an EASA AD.

The FAA is issuing this AD to address inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the MLG wheel axles, which could lead to wrong inputs to the anti-skid function, whenever activated, with consequent reduced braking capability, and possibly result in damage to the airplane and loss of control during landing. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (06.30.25): Ground Stop (GS)

Ground Stop (GS) The GS is a process that requires aircraft that meet a specific criteria to remain on the ground. The criteria may be airport specific, airspace specific, or equip>[...]

ANN's Daily Aero-Linx (06.30.25)

Aero Linx: Australian Transport Safety Bureau (ATSB) The Australian Transport Safety Bureau (ATSB) improves safety and public confidence in aviation, marine and rail transport thro>[...]

Aero-News: Quote of the Day (06.30.25)

“The Palo Alto stopover confirmed—yet again—that flight schools and aero-clubs are no longer just curious about electric training; they are ready to buy. In just >[...]

NTSB Final Report: ICON A5

Pilot’s Failure To Maintain Clearance From The Water While Flying At A Low Altitude Analysis: The flight of two airplanes was in cruise flight on a north heading about 50 ft >[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC