Sat, Apr 12, 2014
Flight Design C4 Aircraft Is First Target Application
The German Ministry of Economic Affairs has granted funding for a research project that aims at development of a modular “SafetyBox” cabin safety system for light aircraft. The new system will provide a safety cage around the occupants of an aircraft, whose functionality builds upon an integrated consideration of several elements, namely intelligently designed and located crash absorber elements, stiff cabin structure with dedicated load paths for the majority of crash scenarios, seat installation and restraint systems. This is significantly supported by crash-optimized ergonomic designs and enhanced fire protection concepts.

The concept goes significantly beyond current aircraft designs, where the certification requirements plainly ask for consideration of certain crash accelerations to the seat and restraint system, regardless of the capability and level of energy absorption of the surrounding fuselage cell. With the new approach selected in this research program, the SafetyBox project team is optimizing the interaction of all the available elements in the early design phase of an aircraft. This will lead to a system of multiple modular elements that subsequently can be tailored to multiple applications in various aircraft designs. With this, the SafetyBox team is leading a path that is fully in line with the intentions of the current Part 23 re-write activity, jointly driven by all major Aviation Authorities, aircraft industry and aircraft users.
The SafetyBox project team has selected Flight Design’s new C4 aircraft as the first aircraft for the application of the system. Development times of the SafetyBox system match naturally with the development times of the C4 project, which makes this a natural initial project. The full development will culminate in full scale crash testing of a completed aircraft under controlled conditions, planned for Summer 2015, to validate the superior suitability of the new system. The system is designed as a modular system and will be offered to other aircraft manufacturers on the market, application is not limited to Flight Design products.
The funding has been granted by the German Ministry of Economic Affairs within the ZIM initiative and was granted through AiF as the responsible executive organization. The application activity was launched by NorLiN Northern Lightweight Design Network of Hamburg, and involves the development partners Autoflug GmbH, Flight Design GmbH, Silence Aircraft GmbH, Titan Präcis Metallurgie GmbH, HAW Hamburg – Department Fahrzeugtechnik und Flugzeugbau together with iDS Hamburg, and Faserinstitut e.V (FIBRE). The project is coordinated by Faserinstitut Bremen e.V. (FIBRE).
Flight Design presented this project with displays at AERO Friedrichshafen.
More News
From 2021: The Inside Skinny On What Being An ANN Oshkosh Stringer Is All About By ANN Senior Stringer Extraordinare, Gene Yarbrough The annual gathering at Oshkosh is a right of p>[...]
Pilot Asked The Mechanic To Go For A Test Flight Around The Airport Traffic Pattern With Him For A Touch-And-Go Landing, And Then A Full-Stop Landing On May 7, 2025, about 1600 eas>[...]
From 2010 (YouTube Edition): Skiles Reflects On His Ring-Side Seat To An Historic Event Jeff Skiles, First Officer of US Airways Flight 1549, "The Miracle on the Hudson," was the g>[...]
“The FAA conducted a comprehensive safety review of the SpaceX Starship Flight 8 mishap and determined that the company has satisfactorily addressed the causes of the mishap,>[...]
Fuel Remaining A phrase used by either pilots or controllers when relating to the fuel remaining on board until actual fuel exhaustion. When transmitting such information in respon>[...]