AD: Lockheed Martin Corporation/Lockheed Martin Aeronautics | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-10.28.24

Airborne-NextGen-10.29.24

Airborne-Unlimited-10.30.24

Airborne-Unlimited-10.24.24

Airborne-Unlimited-10.25.24

Sun, May 16, 2021

AD: Lockheed Martin Corporation/Lockheed Martin Aeronautics

AD 2021-09-15 Prompted By A Crack Found On A Web Attachment Flange

The FAA is adopting a new airworthiness directive (AD) for all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes, type certificated in any category; and Model C-130A, C-130B, C-130BL, C-130E, C130H, C-130H-30, C-130J, C-130J-30, EC-130Q, HC-130H, KC-130H, NC-130B, NC-130, and WC-130H airplanes, type certificated in the restricted or amateur category.

This AD was prompted by a crack found on the web attachment flange of the center wing upper forward corner fitting. This AD requires an eddy current surface scan for cracks of the center wing upper and lower forward corner fittings and fasteners, a torque check of the left and right outer-wing-to-center-wing frontbeam-web-joint-splice-angle fasteners, and repair, retorqueing, or replacement if necessary. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 1, 2021.

Supplementary Information: The FAA has received a report indicating that a crack was found on the web attachment flange of the center wing upper forward corner fitting. Loose fasteners in the wing station 220 wing joint at the front beam web can cause internal load redistribution and consequent cracked center wing upper and lower corner fittings and failed fasteners in those fittings. This condition, if not addressed, could result in reduced structural integrity of the airplane and loss of control of the airplane. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

Senator Pushes FAA to Accelerate Rocket Launch Licensing

States That Current Process is Damaging National Aerospace Development US Senator Jerry Morgan is pushing the FAA to speed up the process for rocket launch licensing. He argues tha>[...]

Classic Aero-TV: RJ Gritter - Part of Aviation’s Bright New Future

From 2015 (YouTube Edition): Model Aviator Aims For Full-Scale Career While at the 2015 Indoor Electric RC Festival, referred to as eFest, ANN CEO and Editor-In-Chief, Jim Campbell>[...]

Aero-FAQ: Dave Juwel's Aviation Marketing Stories -- ITBOA BNITBOB

Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]

ANN's Daily Aero-Linx (10.27.24)

Aero Linx: Cardinal Flyers Online The Cardinal Flyers Online Web site was created and is maintained by me, Keith Peterson. My wife Debbie and I have owned a 1976 RG since 1985. Wit>[...]

ANN's Daily Aero-Term (10.27.24): Clearance Void If Not Off By (Time)

Clearance Void If Not Off By (Time) Used by ATC to advise an aircraft that the departure release is automatically canceled if takeoff is not made prior to a specified time. The exp>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC