Wed, Mar 28, 2018
Latest In A Family Of RF Products
The MGL Avionics V16 Com Radio and Razor/Vega Control Heads are now available in the US.
The V16 Com Radio is the latest generation and a new family of RF products by MGL Avionics and Chief Engineer Rainier Lamers. The V16 is the first in a new ecosystem of Com Radios, Nav Radios and controllers.
The V16 is a split design remote-mount Com Radio that is controlled via a separate controller/EFIS. The unit can be controlled by a mix (and any number) of Razor or Vega Control Heads. This means dual left seat and right seat radio displays and controls, or front and back (for tandem seat aircraft). It can also be controlled directly by an MGL Avionics iEFIS, with or without Razor/Vega Controls.
The V16 Com Radio boasts 10 Watts of Transmit Power (unmodulated carrier). When paired with a Razor/Vega control, the control can be connected to any EFIS or display that communicates with SL30/SL40 protocols, to tune the radio and load frequency lists.
The V16 includes a 2-place intercom with a wide-range VOX system. Multiple headsets can be connected to the Passenger channel if necessary. The advanced voice-activated intercom provides clear audio in noisy cockpits. In extreme cases the intercom can be activated via a switch connected to V16 (intercom PTT). The V16 can replay up to a minute of the last several transmissions. Miss a clearance from ATC? No problem - simply hit the Playback button on your Razor Control head or use a switch connected to discrete input in V16 Com to replay the last transmission. Hit the button again to play the previous transmission.
A full Interface Control Document (ICD) is published to allow for third party use of the V16 Com radio. Ideal for drone / UAV applications or for integrating with full glass panel systems where a remote VHF Com is required.
Other features include:
- Auxiliary Audio/Music input with auto-mute
- TX Interlock for dual radio installations
- Built-in SWR Meter to check antenna matching. Good antenna match will result in VSWR of 1.3 or less (ideal would be 1.0, which would mean no reflected power.
- Remote flip-flop
- Scan (monitor standby frequency).Channel Spacing: 25KHz or 8.33KHz
- Input Voltage: 12/14V and 24/28V (10-28 Volts)
- Current Draw at 13.8V Supply: RX: 0.3A and TX: 2.5A (10 Watts)
- Weight: 10.6 oz (300 grams)
(Images provided with MGL Avionics media release)
More News
Improper Installation Of The Fuel Line That Connected The Fuel Pump To The Four-Way Distributor Analysis: The airplane was on the final leg of a flight to reposition it to its home>[...]
Decision Altitude (DA) A specified altitude (mean sea level (MSL)) on an instrument approach procedure (ILS, GLS, vertically guided RNAV) at which the pilot must decide whether to >[...]
“With the arrival of the second B-21 Raider, our flight test campaign gains substantial momentum. We can now expedite critical evaluations of mission systems and weapons capa>[...]
Also: Potential Mars Biosignature, Boeing August Deliveries, JetBlue Retires Final E190, Av Safety Awareness Czech plane maker Bristell was awarded its first FAA Type Certification>[...]
Also: Commercial A/C Certification, GMR Adds More Bell 429s, Helo Denial, John “Lucky” Luckadoo Flies West CAF’s Col. Mark Novak has accumulated more than 1,000 f>[...]
NTSB Final Report: Evektor-Aerotechnik A S Harmony LSA
See All