Airbus, Eaton Raise the Pressure | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Tue, Jun 03, 2003

Airbus, Eaton Raise the Pressure

A380 Starts 5000psi Club

Eaton Corporation and Airbus have now unveiled the world's first 5000-psi commercial aircraft hydraulic pump, specifically designed for the world's largest passenger aircraft -- the Airbus A380.

Fluid dynamics 101:

The application of this new higher-pressure standard for fluid power generation on a commercial aircraft will allow Airbus to achieve significant weight savings by reducing the diameter of the hydraulic fluid lines and the size of the components that operate the aircraft's primary flight control system.

Craig Arnold, senior vice president and group executive for Eaton's Fluid Power business, explained, "By elevating the hydraulic system pressure standard for commercial passenger aircraft from 3000-psi to 5000-psi, Eaton and Airbus will be able to reduce aircraft weight, increase reliability and improve operational performance."

Several of the innovative 5,000-psi hydraulic pumps will begin pre-qualification testing this month. Airbus said the first flight of the A380 with the new hydraulic system will be in late 2004 with commercial service to begin in 2006.

Eight Vickers-brand 5000-psi hydraulic pumps will provide fluid power to the aircraft's primary flight controls, landing gear, nose wheel steering and other aircraft utility systems. These higher-pressure pumps will also be the first commercial units designed to mechanically disengage from the main engine gearbox, preventing any fluid contamination from entering the hydraulic system, and significantly improving operational availability to the service airline.

The total Eaton system includes eight engine-driven hydraulic pumps (above) per aircraft and four 5000-psi AC motor pumps (lower photo) with associated electronic controls and protection systems.

Airbus announced in October of 2001 that Eaton won the hydraulic system contract for the A380.

FMI: www.eaton.com; www.airbus.com

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC