Shuttle Program Managers Discuss Atlantis Launch Readiness | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-10.27.25

AirborneNextGen-
10.28.25

Airborne-Unlimited-10.29.25

Airborne-Unlimited-10.30.25

AirborneUnlimited-10.17.25

Thu, May 31, 2007

Shuttle Program Managers Discuss Atlantis Launch Readiness

Agency Considers Possibility Of Loose Bolts Within Engines

Senior managers with NASA's space shuttle program began a two-day flight readiness review Wednesday, to discuss whether to send the oft-delayed Atlantis into orbit next month. Among the issues being discussed, reports Florida Today, is a possible problem with bolts within the shuttle's three main engines.

Those bolts hold each engine's Low Pressure Oxidizer Turbopump within its housing inside the liquid-fueled engines. Engineers have discovered the silver-plated sleeve inserts the bolts are fastened to could be corroded; if that is the case, the pumps could loosen inside the engines during launch, and trigger a catastrophic liquid oxygen leak.

NASA first became aware of the problem when engineers at Mississippi's Stennis Space Center found one of the 14 bolt inserts holding the turbopump became loose before an engine test -- the third time that's happened in five years, and the eighth occurrence overall throughout the 26-year history of the program. The problem has never cropped up during an actual test.

The agency has determined the problem is most likely to occur on inserts greater than 16 years old. NASA ordered special, oversized versions of the inserts, treated with an anti-corrosion agent, be fitted to shuttle engines to solve the problem.

That decision came after Atlantis -- which was originally due to launch in early March, before a freak hailstorm hit the Cape -- was already prepped, however. NASA asked for a launch waiver, as the inserts within the engines onboard Atlantis are between three and nine years old. Boroscope inspections also indicate the bolts are just fine, and no leakages have been seen during prelaunch tests.

That waiver needs to be approved during the flight readiness review, and the possibility of a launch delay to address the issue remains on the table.

"It's obviously going to be discussed thoroughly," said Kyle Herring, a spokesman for NASA's Johnson Space Center in Houston. "Both sides will be brought to management, and then they'll be able to make a decision."

The review is expected to wrap up by noon EDT Thursday. Stay tuned.

FMI: www.nasa.gov

Advertisement

More News

ANN FAQ: How Do I Become A News Spy?

We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]

Aero-News: Quote of the Day (10.28.25)

“The Coast Guard anticipates new aircraft procurements may be based off Sikorsky’s MH-60R aircraft, which is the maritime variant of the H-60 in active production. Diff>[...]

ANN's Daily Aero-Linx (10.28.25)

Aero Linx: Classic Jet Aircraft Association (CJAA) The CJAA Formation and Safety Team (FAST) Mission is to be the sole authorized provider of formation training and certification f>[...]

NTSB Final Report: Aviat Aircraft Inc A-1B

During A Low Pass Over A Gravel Bar, The Airplane’S Tailwheel Impacted An Area Of Rough, Uneven Terrain Analysis: The pilot reported that he was flying low-level over various>[...]

ANN's Daily Aero-Term (10.28.25): Hold For Release

Hold For Release Used by ATC to delay an aircraft for traffic management reasons; i.e., weather, traffic volume, etc. Hold for release instructions (including departure delay infor>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC