AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.19.25

Airborne-NextGen-05.20.25

AirborneUnlimited-05.21.25

Airborne-AffordableFlyers-05.22.25

AirborneUnlimited-05.23.25

Wed, Aug 17, 2022

AD: The Boeing Company Airplanes

AD 2022-13-10 Prompted By Reports Of Burned Boeing Material Specification (BMS) 8-39 Urethane Foam

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes.

This AD was prompted by reports of burned Boeing Material Specification (BMS) 8-39 urethane foam, which is a material with fire-retardant properties that deteriorate with age. This AD requires replacing certain BMS 8-39 foam pads with Nomex felt in certain areas, removing certain BMS 8-39 foam pads in a certain area (which includes a general visual inspection to find BMS 8-39 foam pads), and inspecting the corner seals to determine if the corner seals were replaced, and replacing affected corner seals. This AD also prohibits the installation of BMS 8-39 urethane foam seal in certain locations. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective September 20, 2022.

 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes. The NPRM published in the Federal Register on January 31, 2022 (87 FR 4828). The NPRM was prompted by reports of burned BMS 8-39 urethane foam, which is a material with fireretardant properties that deteriorate with age. In the NPRM, the FAA proposed to require replacing certain BMS 8-39 foam pads with Nomex felt in certain areas, removing certain BMS 8-39 foam pads in a certain area (which includes a general visual inspection to find BMS 8-39 foam pads), and inspecting the corner seals to determine if the corner seals were replaced, and replacing affected corner seals. The FAA is issuing this AD to address degraded BMS 8-39 urethane foam used in seals, which may fail to maintain sufficient halon concentrations in the cargo compartments to extinguish or contain fire or smoke, and may result in penetration of smoke or fire into the flight compartment, leading to possible loss of control of the airplane.

FMI: www.regulations.gov

Advertisement

More News

NTSB Prelim: Lee Aviation LLC JA30 SuperStol

A Puff Of Smoke Came Out From The Top Of The Engine Cowling Followed By A Total Loss Of Engine Power On May 9, 2025, about 1020 mountain daylight time, an experimental amateur-buil>[...]

Classic Aero-TV: Curtiss Jenny Build Wows AirVenture Crowds

From 2022 (YouTube Edition): Jenny, I’ve Got Your Number... Among the magnificent antique aircraft on display at EAA’s AirVenture 2022 was a 1918 Curtiss Jenny painstak>[...]

ANN's Daily Aero-Term (05.30.25): Very High Frequency (VHF)

Very High Frequency (VHF) The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/grou>[...]

Aero-News: Quote of the Day (05.30.25)

“From approximately November 2021 through January 2022, Britton-Harr, acting on behalf of AeroVanti, entered into lease-purchase agreements for five Piaggio-manufactured airc>[...]

Classic Aero-TV: Quest Kodiak Enhances Migration Monitoring Programs

From 2008 (YouTube Edition): US Fish and Wildlife Service Chooses The Kodiak To Monitor Waterfowl Populations Waterfowl all over North America may soon have to get used to a new ab>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC