USAF Falcons Undergo Facelift | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-09.15.25

AirborneNextGen-
09.09.25

Airborne-Unlimited-09.10.25

Airborne-AffordableFlyers-09.11.25

AirborneUnlimited-09.12.25

Sun, Nov 25, 2018

USAF Falcons Undergo Facelift

Work Intended To Provide A Protective Finish That Will Increase The Lifespan Of The Airplanes

Upon entering a room lined with panels and LED lights, described solely as something out of a science fiction movie, people in polar white suits are ready to re-skin a new beast.  The Airmen working across two shifts in the work center, paint and renovate the aircraft and equipment assigned to the Air Force’s largest combat F-16 Fighting Falcon wing.

The work being performed on the aircraft is intended to provide a protective finish that prevents damage to the structure and enhance the aircraft’s overall lifespan. “Our mission here is to remove defective aircraft coatings,” said Tech. Sgt. Ryan Tinsley, 20th Equipment Maintenance Squadron corrosion control noncommissioned officer in charge. “We also inspect for corrosion and reapply coats should the aircraft need it.”

Tinsley went on to say the flight helps identify and troubleshoot paint fatigue that may be caused by consistent flights.

Within the facility, a locker room houses the protective gear of the Airmen assigned to the 20th EMS aircraft structural maintenance flight. “When we paint, no matter what we are working on that day, we keep safety in mind at all times,” said Tech. Sgt. Joseph Harris, 20th EMS corrosion control shift lead.

Each job requires the Airmen to gear up from top to bottom to prevent any damage or poisoning that could be caused by the exposure to paint fumes.  During the painting process, corrosion control Airmen inspect the aircraft for any cracks or wear that may have been caused through various aerial missions. “Our Airmen are the ones out there doing the hard work,” said Tinsley. “They are either sanding or painting anything that may come into the paint barn … they’re the real work horses, they’re killing it.”

With the continued support of these technicians the mission of the 20th Fighter Wing can thrive and allow the pilots to accomplish the suppression of enemy air defenses mission anytime, anywhere.

(Image provided with USAF news release)

FMI: www.af.mil

Advertisement

More News

NTSB Final Report: Evektor-Aerotechnik A S Harmony LSA

Improper Installation Of The Fuel Line That Connected The Fuel Pump To The Four-Way Distributor Analysis: The airplane was on the final leg of a flight to reposition it to its home>[...]

ANN's Daily Aero-Term (09.15.25): Decision Altitude (DA)

Decision Altitude (DA) A specified altitude (mean sea level (MSL)) on an instrument approach procedure (ILS, GLS, vertically guided RNAV) at which the pilot must decide whether to >[...]

Aero-News: Quote of the Day (09.15.25)

“With the arrival of the second B-21 Raider, our flight test campaign gains substantial momentum. We can now expedite critical evaluations of mission systems and weapons capa>[...]

Airborne 09.12.25: Bristell Cert, Jetson ONE Delivery, GAMA Sales Report

Also: Potential Mars Biosignature, Boeing August Deliveries, JetBlue Retires Final E190, Av Safety Awareness Czech plane maker Bristell was awarded its first FAA Type Certification>[...]

Airborne 09.10.25: 1000 Hr B29 Pilot, Airplane Pile-Up, Haitian Restrictions

Also: Commercial A/C Certification, GMR Adds More Bell 429s, Helo Denial, John “Lucky” Luckadoo Flies West CAF’s Col. Mark Novak has accumulated more than 1,000 f>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC