AD: Bombardier, Inc., Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Jun 10, 2020

AD: Bombardier, Inc., Airplanes

AD 2020-11-10 Due To Report Of An In-Flight Event Where A Flightcrew Observed A SPOILER FAIL Message

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes.

This AD was prompted by a report of an in-flight event where a flightcrew observed a SPOILER FAIL message and had difficulty maintaining roll control of the airplane. This AD requires revising the existing airplane flight manual (AFM) to provide the flightcrew with procedures related to roll spoiler failures that reduce the flightcrew workload during this type of failure scenario. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 14, 2020.

Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian AD CF-2019-29, dated August 12, 2019 (also referred to as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain Bombardier, Inc., Model BD-100-1A10 airplanes. You may examine the MCAI in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-1076. The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model BD-100-1A10 airplanes.

The NPRM published in the Federal Register on January 22, 2020 (85 FR 3553). The NPRM was prompted by a report of an in-flight event where a flightcrew observed a SPOILER FAIL message and had difficulty maintaining roll control of the airplane. The NPRM proposed to require revising the existing AFM to provide the flightcrew with procedures related to roll spoiler failures that reduce the flightcrew workload during this type of failure scenario. The FAA is issuing this AD to address uncommanded deployment of the multi-function spoiler at certain positions, which in combination with specific flap positions and airspeeds, could create an unacceptably high flightcrew workload in maintaining roll control of the airplane and could possibly lead to loss of controllability of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC