Wright Engine Posed Challenges | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-12.02.24

Airborne-NextGen-12.03.24

Airborne-Unlimited-12.04.24

Airborne Flt Training-12.05.24

Airborne-Unlimited-12.06.24

Fri, May 09, 2003

Wright Engine Posed Challenges

Setting Engine Technology Back 100 Years Isn't Easy

John Nowicki, who in his "real job" is in charge of business development for the Aerospace portion of Packer Engineering, met the Wright Redux folks at an EAA chapter meeting. They talked about their plans to build a Wright Flyer, to commemorate the hundredth anniversary of controlled powered flight. Nowicki was impressed, and took the idea to Dr. Ken Packer (a former Marine Corsair pilot), who enthusiastically committed to lead the engineering/building project of the Redux engine.

The Drawings Don't Tell All

The Smithsonian's Wright engine drawings are believed to be as close to the Wright engines as possible; but they're not perfect, nor are they complete. They even contain at least one impossible contradiction. Even so, there's plenty of information there, Nowicki believes, to make as close a replica as humanly possible, given some judgment, some knowledge of history, insight into steam-engine technology; and turn-of-the-century metallurgy and engine design. The Wright Redux engine itself is completely built, as the drawings depict, from the Smithsonian. John Nowicki noted that the Smithsonian drawings don't contain all the materials, tolerances, and so on, that would be found on modern engineering drawings. He did note, "The Smithsonian basically back-engineered what were believed to have been... the original. We're as 'replica' as you can get."

It's a big group of volunteers, that makes this possible.

"We have 30 companies that have contributed their efforts toward this project," Mr. Nowicki (at right of photo, with Dr. Packer, seated, and casting engineer Joe Santner) said. "We took the Smithsonian drawings of the engine block, and Packer Technologies Inc (PTI) turned them into a CAD model; the Terry Austin Group in Quincy (IL) made patterns utilizing the lost foam  method. Then in Cincinnati, we got the Willard Industries folks to actually pour the castings."

Putting this together had its 'easy' parts, as well as its 'hard' ones: "So many have wanted to be part of this project," he told us, "nobody has charged for anything." It wasn't all 'easy,' though. "Keep in mind, we're asking for 'two of everything.'" They're building enough parts to build two engines. "One set is for spares, Nowicki explained. "If everything goes as planned, the spares will be built into a separate engine, for display."

As Mr. Nowicki told ANN, "It is truly a 'replica engine.' All the cast parts were sand cast, the pistons and cylinders, combustion chambers, valve guides and seats, valve heads and the flywheel. One set of cylinders, however, were cut from solid cast iron, not steel." The Smithsonian drawings did note some near-detail: "The fasteners are pretty-much called out: 'fillister-head screws,' 'brass screws,' 'round-head screws;' we're using non-graded hardware, similar to what they would have had back then."

There are very few deviations from the Wright model. "We used more modern alloy of aluminum, a 356  aluminum for the block [the alloy the Wrights used couldn't have been welded, for instance]; but everything else is just as they built it."

Sounds modern; sounds stone-age. All of it is clever.

Mr. Nowicki continued, "It's an aluminum block, with cast-iron cylinders. Charles Taylor, who made the actual engine the Wrights flew, made the original with nothing but a lathe, a drill press, and hand tools. All he had were the drawings he and the Wrights made; and he had seen a similar [internal combustion] engine, before." Taylor, fortunately, had a lot of external-combustion experience. "A lot of it looks like steam-engine technology," John told us, approvingly.

"The crankshaft is a work of art," the Packer man told us. "It was made out of a 1 5/8" x 8" by 36" 4340 steel plate (a material quite similar to what the Wrights used), that weighed 140 pounds. The finished crank weighs just 22 pounds. It was machined out by one of our people, who did crankshafts for the rail industry. Then it was ground in St. Charles (IL), by Auto Machine, who usually grind for classic and vintage autos." It's a five-main, four cylinder crank, "but it's quite flimsy. If you put it between centers, you can push on it and move it .010 to .015"; but when it's in its bearings," he assured us, "it's sturdy."

Harley Davidson used a tin can for a carburetor. The Wrights didn't.

There is no 'carburetor' at all, per se. John explained how the intake side of the engine works: "The induction system is just a small cup that sits on the engine itself. The fuel goes into a tray that sits on the block; heat from the block vaporizes the fuel in the tray, and that gets sucked into the intake valves, which are vacuum-operated." (The exhaust valves are cam-actuated.) The valves are clever, too: cast-iron, with mild steel stems.

"The ignition system," he continued, "is bizarre. There's no spark plugs; there's a set of cam-operated 'points' (right) in each combustion chamber (photo above). When they open and close, the spark [from a magneto, actually more of a generator, then made by Dayton Electric Company, which is now known as Delco --ed.] would touch off the mixture. We've built a magneto, out of cast iron and cast brass, with an armature made by Bison Engineering (St. Charles, IL)."

Volunteers!

John marveled out loud how so much could have been done at all; he wanted us to realize how much the volunteers -- and, on this project, they're all volunteers -- have done. "We call this 'Midwest Volunteerism at its finest.' Add to the list I already started: Research Automation (Aurora IL), who, with Advantage Machine, finished one of the block castings; another block was machined by Craftsman Tool & Mold (also of Aurora). All the steel and rounds came from Napco Steel, out of West Chicago."

John noted, "A lot of the  machining work here was done by high school and college-age kids. They helped develop the metallurgy; they poured the cast iron; they made some of the smaller aluminum parts." The American Foundry Society (in Des Plaines, IL) did the pistons, some of the cylinders, the combustion chambers, the cast-iron flywheel, and a lot of the other parts.

Specs, please.

The 201 cubic inch engine is expected to make 16 horsepower at 1600 rpm. Overall weight will be between 150 and 160 pounds. It's a little lighter than the Wright's piece. There was a little extra machining of the cast-iron cylinders, to improve cooling and lighten the overall weight: "We took off 1/8" from the OD (inside the water jacket) on the cylinders, which makes them 3 lbs lighter, each," John explained.

The weight of the Wright replica engine is, though, considerably higher than the 'mule' engine that's been used for the first flights of the Wright Redux airframe. The engine that was flown is a modern V-twin four-stroke, making 20 hp (below, on thrust-test day). It's geared to turn the props at the proper rpm. [Because it's lighter than the replica Wright engine, it has had weight added in the engine mount, so the whole package duplicates the weight and CG of the real Wright engine --ed.]

The compression ratio is about 4.4:1, on a 4-inch bore. Stroke is in the neighborhood of 4". Connecting rod length is about 10".

Everything shows ingenuity. Nowicki told us, "The rod is made up of five parts: crank and piston ends are cast bronze; there's a small connector that screws into that, and gets brazed into a piece of steel tubing."

"The wristpin is solid with the piston; it floats on the rod," John noted. The drawings here are clearly in conflict -- there were more than one engine on the drawings. [The drawings, for  instance, show both the rod/pin and piston/pin matings as solidly-mounted. Obviously, that cannot work, in a single engine --ed.]

The pistons have three cast-iron compression rings, like a steam engine. There's .004" piston-to-wall clearance. Main bearings are poured, split-shell babbitt. The halves will be 'scraped' in. Rod bearing clearance will be about .0015 to .002"

The water system holds a gallon and a half to two gallons. "There's a sort of a standpipe system," Mr. Nowicki said. "Cold water comes in through the top of the engine. The hot water goes into a secondary compartment, forcing circulation. Steam pressure and hot water rise, and spill back into the colder water in the system." It's basically a thermo-siphon system, like on a Model T Ford.

Gas and oil:

The Wright Flyer held just short of half a gallon -- they weren't going fly the Atlantic with it. For the replica's flight, even the gasoline is special. "Exxon-Mobil even formulated 'period fuel' for us. It's about 48-octane," our guide said, and went to the next logical question, before we
asked. "We're using modern oil." That's because the Wright's first engine had, "no lubrication system -- just open the side panels, and squirt it in and let it go: no splash, no sump, no nothing. [Later 1903-model Wright engines, and all subsequent Wright engines, had oiling systems.] We're going to have holes in the bearing caps, like the Wrights had." He is making one other concession to engine life: "We're using Lubriplate 180 as an assembly lube."

Sometimes there are safety concessions that need to be made. The Wright's engine avoided one obvious one, which Packer considers important. "There's no throttle; we're adding a safety mag ground; but the real way to shut the engine down was to shut off the fuel." That fuel shutoff is also employed on the Redux machine.

How do you break in an engine with a 5-hour TBO?

Very carefully, John said. "We probably won't run more than about 5 to ten hours, ten minutes at a time. We'll run four or five test sessions, and then put it on the airplane... The engine should get its first test run in the next couple weeks."

One other parallel...

There's yet another parallel between the Wright Redux and the Wrights' tradition. When this airplane goes into the Museum of Science and Industry in Chicago, it will be accompanied by a plaque that will commemorate the builders. Octave Chanute, who helped the Wright Brothers, also helped found the Western Society of Engineers... which is donating the Wright Redux plaque for the Museum of Science and Industry exhibit.

FMI: www.wrightredux.org; www.packerengineering.com

Advertisement

More News

ANN's Daily Aero-Linx (12.05.24)

Aero Linx: Canadian Bushplane Heritage Centre Visit the Canadian Bushplane Heritage Centre. The only museum of its kind in Canada. A world class museum connecting people of all age>[...]

ANN's Daily Aero-Term (12.05.24): Chaff

Chaff Thin, narrow metallic reflectors of various lengths and frequency responses, used to reflect radar energy. These reflectors, when dropped from aircraft and allowed to drift d>[...]

Airborne 12.02.24: Electra FG EIS, Prez Osprey Problems, Starship Wants 25

Also: EAA Ray Foundation, MagniX Records, Ruko U11MINI Drone, RCAF PC-21s Elektra Solar recently put the first aircraft from its Elektra Trainer Fixed-Gear (FG) family into service>[...]

Airborne 11.27.24: CAP Tragedy, Gulfstream Milestone, Van Celebrates His 85th

Also: ANN/Airborne Holiday Schedule, UT NG Gets New Apaches, UK Airport Reopening, Laser v Helo A Civil Air Patrol search and rescue training flight over steep and rugged terrain e>[...]

ANN's Daily Aero-Linx (12.06.24)

Aero Linx: National Air Traffic Controllers Association (NATCA) NATCA members embrace new technology and are eager to use the most efficient and modern procedures available. First >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC