Flap Over Flap Separation Settled | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Jul 02, 2003

Flap Over Flap Separation Settled

Air NZ Didn't Do It: Report

New Zealand's Transport Accident Investigation Commission has released its report on the loss of a flap from an ANZ 747 last August. The attachment link came under suspicion, and was found to have been the first point of failure; Boeing has since redesigned the link. ANZ was not found to have done anything wrong in the incident; no one was hurt, as the 372 people made it into LAX, OK.

The TAIC Report:

Boeing 747-419, ZK-NBS, flight NZ 2, in-flight flap separation over Manukau Harbour by Auckland International Airport On Friday 30 August 2002 at 2120, ZK-NBS (flight NZ 2), a Boeing 747-419, took off from runway 23 at Auckland International Airport for Los Angeles. On board were 355 passengers and 17 crew, including 3 pilots on duty in the cockpit.

During a left turn shortly after departure at night, with the flaps still extended to the take-off setting, about 70% of the right inboard trailing edge fore flap separated from the aircraft. The pilots did not receive any cockpit indications of anything untoward and only felt some slight bumps they thought to be from turbulence. The crew were unaware of the separation until the landing approach at Los Angeles some 12 hours later, when the flaps were selected for landing. The pilots took the appropriate action and carried out a go around procedure. The aircraft was repositioned for a further approach and landed safely. The safety of the aircraft and its occupants was not compromised by the incident. No one was injured.

The flap separated because its inboard attachment link failed. The link failed because a pre-existing stress corrosion crack had grown to a critical size, probably in a short period of time. The operator had inspected the flap assembly routinely and specifically as the aircraft manufacturer required, but neither the start of the crack nor its growth could be detected during those inspections.

A safety issue identified was the design adequacy of the fore flap attachment links. The aircraft manufacturer has completed a design change to overcome the limitations of the links.

FMI: www.taic.org.nz/aviation/02-010.pdf

Advertisement

More News

Airborne 05.10.24: Icon Auction, Drunk MedEvac Pilot, Bell ALFA

Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]

ANN's Daily Aero-Term (05.13.24): ILS PRM Approach

ILS PRM Approach An instrument landing system (ILS) approach conducted to parallel runways whose extended centerlines are separated by less than 4,300 feet and at least 3,000 feet >[...]

ANN's Daily Aero-Linx (05.13.24)

Aero Linx: FlyPups FlyPups transports dogs from desperate situations to fosters, no-kill shelters, and fur-ever homes. We deliver trained dogs to veterans for service and companion>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Airborne 05.08.24: Denali Update, Dad-Daughter Gyro, Lake SAIB

Also: NBAA on FAA Reauth, DJI AG Drones, HI Insurance Bill Defeated, SPSA Airtankers The Beechcraft Denali continues moving forward towards certification, having received its FAA T>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC