AD: Various Restricted Category Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Fri, Oct 30, 2020

AD: Various Restricted Category Helicopters

AD 2020-22-19 Requires Initial And Recurring Inspections Of The Main Rotor (M/R) Blade Spindle Cuff

The FAA is adopting a new airworthiness directive (AD) for various restricted category helicopters, originally manufactured by Sikorsky Aircraft Corporation (Sikorsky), Model EH-60A, HH-60L, S-70, S-70A, S-70C, S-70C(M), S-70C(M1), and UH-60A.

This AD requires initial and recurring inspections of the main rotor (M/R) blade spindle cuff for a crack. This AD was prompted by multiple reports of a cracked M/R blade spindle cuff. These actions are intended to prevent an unsafe condition on these products. This AD is effective December 3, 2020.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to various restricted category helicopters, originally manufactured by Sikorsky, Model EH-60A, HH-60L, S-70, S-70A, S-70C, S-70C(M), S-70C(M1), and UH-60A, with an M/R blade spindle cuff part number 70150-09109-041 installed. The NPRM published in the Federal Register on July 9, 2020 (85 FR 41221).

The NPRM was prompted by multiple reports of a cracked M/R blade spindle cuff. In 2008, Sikorsky reported an M/R blade spindle cuff on a Model UH-60A helicopter that cracked across the lower inboard bolt holes. Investigation determined the crack was caused by a non-conforming hole edge break, specifically a burr, introduced during an overhaul at a non-Sikorsky overhaul facility.

Sikorsky issued Sikorsky Safety Advisory No. SSA-S70-08-002, dated December 11, 2008 (SSAS70-08-002), for Black Hawk  Model H-60- and S-70-series helicopters to inform operators of the incident and recommend compliance with Sikorsky's preventative maintenance inspections. The safety advisory also recommended that operators with M/R blades overhauled by a non-Sikorsky repair facility contact that facility to verify whether the hole edge radius requirement was met during the overhaul.

In 2015, the FAA received an additional report of an M/R blade spindle cuff on a military model helicopter that cracked. Investigation from this reporting has revealed no anomalies at the crack initiation site. In each instance, a crack initiated at a bolt hole and spread to either an adjacent bolt hole or to the free edge. Due to design similarity, Model EH-60A, HH-60L, S-70, S-70A, S-70C, S70C(M), S-70C(M1), and UH-60A helicopters are all affected by this unsafe condition.

Accordingly, the NPRM proposed to require initial and recurring inspections of the M/R blade spindle cuff for a crack. The proposed requirements were intended to detect a crack, prevent failure of an M/R blade spindle cuff, loss of an M/R blade, and loss of control of the helicopter.

FMI: www.regulations.gov

Advertisement

More News

Aero-News: Quote of the Day (07.11.25)

“Honored to accept this mission. Time to take over space. Let’s launch.” Source: SecTrans Sean Duffy commenting after President Donald Trump appointed U.S. Secret>[...]

ANN's Daily Aero-Term (07.11.25): Permanent Echo

Permanent Echo Radar signals reflected from fixed objects on the earth's surface; e.g., buildings, towers, terrain. Permanent echoes are distinguished from “ground clutter&rd>[...]

ANN's Daily Aero-Linx (07.11.25)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

NTSB Final Report: Schweizer SGS 2-33A

Glider Encountered A Loss Of Lift And There Was Not Sufficient Altitude To Reach The Airport Analysis: The flight instructor reported that while turning final, the glider encounter>[...]

NTSB Prelim: Aeronca 7AC

Airplane Climbed To 100 Ft Above Ground Level, At Which Time The Airplane Experienced A Total Loss Of Engine Power On May 24, 2025, at 1300 eastern daylight time, an Aeronca 7AC, N>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC